Ashly Sra-2075 Rackmount Stereo Power Amplifier - 40 Watts Per Channel At 8 Ohms
Got a better price? We'll match it. Come chat with us!
Ashly SRA-2075 overview
The Ashly SRA-2075 is a 2-channel convection-cooled rackmount P.A. or studio power amplifier housed in a rugged 1RU metal chassis, offering an output of 40 Watts per side at 8 Ohms, designed to drive 4 and 8 Ohm loads.
The SRA-2075 incorporates a switch-mode-power supply and Class-D amplifier circuitry, providing a power-efficient solution. The low-noise unit features a switchable HPF filter and selectable gain sensitivity, turn-on delay DIP switches with up to 8 seconds of delay available, and dual or bridge modes of operation.
The SRA-2075 is equipped with a front-panel headphone monitoring output, an internally switchable 120V/240V power supply, extensive protection circuitry, and standard Euroblock inputs along with screw terminal outputs.
- 1RU 9 lb. lightweight rackmount stereo power amplifier with 40 Watts per side power output at 8 Ohms
- Selectable Dual or Bridge Mono Operation, designed for 4- or 8-Ohm loads
- 2-stage high-efficiency switched mode power supply with high power-to-weight ratio
- Ultra-quiet convection-cooled operation
- On-board 80Hz HPF, selectable gain sensitivity
- Up to 8 sec. of turn-on delay with selectable Dip Switch complement
- Comprehensive amplifier protection circuitry includes: Output Over-current, DC Output, Main Supply Rail Over-voltage, Chassis Temperature, Inrush Limiting, Mains Fuse
- Front Panel Indicators include: overall power, standby, and protect; per-channel clip and signal indicators
- Euroblock input connectors, Screw Terminal outputs
Ashly SRA-2075 specs
Power Rating Stereo @ 8 Ohms: 40W per Ch.
Stereo @ 4 Ohms: 75W per Ch.
Mono Bridge @ 8 Ohms: 150W
Damping Factor >200, 8-Ohm load, <1kHz Input Sensitivity 1.5V Input Impedance 20 kOhms, Balanced Gain Selectable 26dB or 36dB Frequency Response 20 Hz - 20 kHz, +/-1.0dB Signal-to-Noise Ratio >98dB, 20Hz - 20kHz unweighted Total Harmonic Distortion (THD) <0.01% (8-Ohm load, 10dB below rated power, 20Hz - 10kHz Input Connections 2 x Ch.1,2 3- Pin Euroblock Output Connectors 2 x Ch.1,2 Screw Terminals
1 x 1/4" Stereo Headphone Jack
Controls Front Panel 1 Power Switch
2 x Gain Control Knobs
Controls (Rear) 4 x Delay DIP Switches
2 x 80Hz HPF On/Off Button
2 x Gain Sensitivity Button
2 x Bridge/Stereo Mode Switch
Indicators 1 x Blue Power On LED
1 x Yellow Standby LED
1 x Red Protect LED
2 x Red Clip LED's
2 x Green Signal LED's
Cooling Convection-cooled Power Consumption 18.75W (1/8 Power Pink Noise @ 4 Ohm)
1/8 Power: 0.69A
Dimensions 19 x 1.75 x 11" (483 x 44.5 x 279.4mm) Weight 9 lb (4.1 kg) Specialties Adjustable Turn-On delay Switches
Switch-Mode Power Supply