Ashly PEMA 8125.70D 1000W Pema Network Power Amplifier With Opdante Card Amp Protea Dsp Software Suite 70V

Name: Ashly PEMA 8125.70D 1000W Pema Network Power Amplifier With Opdante Card Amp Protea Dsp Software Suite 70V
Brand: RedOne Music Canada

UPC694970001701

SKUPEMA-8125.70D

CA$5,729.00

Online financing options available at checkout

Receive 28645 points when buying this product!

Available Online

Usually 1-2 weeks before shipment

Not In-Store

Visit Us

In case of additional delays, you will be contacted by one of our sales representative.

Any questions? We are here to help.

1-(888)-733-6631 Visit Help Center

Description

Ashly PEMA 8125.70D overview

The 8-Channel 1000W Pema Network Power Amplifier from Ashly consists of eight inputs and eight power amplifier outputs with the ability to assign any input to any output. The amplifier features pre-installed OPDante network audio interface card and the Protea DSP Software Suite. When switched into bridged-mono mode, eight powered outputs deliver 75W into an 8 ohm load, 125W into an 4 ohm load, and channel pairs can be bridged for 250W into an 8 ohm load.

The power amplifier includes Euroblock input connectors and Euroblock output connectors. Besides remote standby for power up, DC remote level control, and contact closure preset recall, the amplifier also features Ethernet control, level, mute, polarity, temperature, current, and amplifier over current conditions. The front panel indicates power status, standby, protect, power switch On/Off, signal level, bridge, temperature & current levels, and Ethernet communication. A temperature dependent speed-controlled axial fan shall maintain the correct operating temperature. Full programming and control of the unit is from the rear panel RJ-45 jack connected to a 10/100BASE-T Ethernet LAN connected to a PC running the Protea Software. The amplifier mounts in a standard 19” rack using two spaces (3.5” high).

The power amplifier has an internal factory-installed Digital Signal Processing (DSP) controlled using the Protea Software Suite (network-enabled). Each amplifier input channel can be configured with pluggable DSP blocks to have its own dynamics control, gain functions, graphic and/or parametric EQ, Hi-pass/Lo-pass filters, time delay, metering, and test signal generator. Hot-plug DSP placement allows you to insert any function into any channel block, even when running live audio. A mixer section with assignable routing allows any input to drive any or all amplifier outputs. The matrix mixer also has selectable gain sharing automatic mixing capability. Outputs have the same DSP functions as inputs, with the addition of a quick and automated crossover setup. Up to 30 presets shall be standard and four presets shall be accessible via contact closure using the Protea Software Suite.

70V constant voltage

8x8 DSP matrix with 8-channel power amplifier

OPDante network audio interface

FIR Filter capable

Eight built-in mic preamp outputs

Gain sharing automatic mixing capability

Automatic feedback suppression

Ambient noise compensation

Telephone/PBX input

Dual RCA and balanced Euroblock inputs

Post DSP Aux line level outputs

Stereo summed to mono

Event scheduling (RTC)

Adjustable HP/LP filters

Built-in pink/white noise & sine wave generator

Protea DSP software suite

Hot-plug DSP placement

15V phantom power for mic inputs

Full control using software over 10/100BASE-T Ethernet

Automatic DHCP network IP configuration

Euroblock connectors for preset recall, DC remote level control, and serial data control

External control via standard wall remotes, Ethernet wall remotes, Remote iPad app

Level control via variable DC control voltage

Stand-by mode activation via contact closure

Multi-level security

cTUVus, CE, FCC, & RoHS safety/compliance

nly available w/ 48 kHz sampling rate (inputs only) Filters: 12 In/Out per filter: Yes Filter Modes: Float, Restricted, Manual Filter Type: Notch, Parametric Filter Frequency Range: 20 Hz to 20 kHz Parametric Filter Level: +15 to -30 dB Filter Bandwidth: 0.016 to 3.995 Octave Detector Sensitivity: 5 levels Float Time: 5 minutes to 24 hours
Crossover	2 Way, 3 Way, 4 Way Crossover & High-Pass/Low-Pass Filters Bessel & Butterworth Filters: 12/18/24/48 dB/oct Linkwitz-Riley Filter: 12/24/48 dB/oct Frequency: Off, 20 Hz to 20 kHz
Delay	@ 48 kHz Sampling Rate (Input Time, Distance & Temperature) Speaker Delay: 0 to 21 ms Delay: 0 to 682 ms @ 96 kHz Sampling Rate (Input Time, Distance & Temperature) Speaker Delay: 0 to 10.6 ms Delay: 0 to 341 ms
Audio Metering	Range: -60 to +20 dBu Increments: 1 dB Peak Hold Indicator: Yes
Signal Generator	Pink noise, White noise, Sine wave Signal Level: Off, -50 to +20 dBu Sine Wave Frequency: 20 Hz to 12 kHz
Mixer	Mixer Gain (0.5 dB increments): Off, -50 to +12 dB Mute: Per channel Auto-Mixer: Per channel Global Auto-mixer Response: 0.01 to 2 sec Enable Ducking at Mixer: Yes Ducking LED: Per channel if enabled Metering: Level, auto-mixer level
Processors	Input A/D, Output D/A: 24-bit DSP Processors: 32-bit floating point Sample Rates: 48 and 96 kHz Propagation Delay: 1.42 ms @ 48 kHz & 1.71 ms @ 96 kHz

Estimated shipping calculator