Designed for use on large stages both in and out of doors, the RCF TTL6-A is an active, high-output, three-way line array module capable of pushing 2200W RMS. It provides a frequency response of 45 Hz to 20 kHz, utilizing four digitally controlled channels of class-D amplification to power the sound, and sporting 90 x 30° of coverage. This line array module, providing equal level distribution over a large range, can be stacked with other units when wider dispersion is required.
The TTL6-A offers 2x12" woofers for the lows, 4x6" drivers for the midrange, and a 3" voice coil compression driver. Its wave-guide helps to provide uniform directionality, while its four-channel, DSP-controlled amplifier mitigates potential noise and distortion issues.
The cabinet itself is constructed from Baltic birch plywood, with special glue employed to ensure water resistance. To withstand the rigors of the road, the internal structure of the cabinet has been heavily braced, with large metal brackets reinforcing the cabinet throughout. Four die-cast, powder-coated aluminum handles with rubber handgrips are provided, as are fixing points for rigging the module in various configurations.
Titanium Diaphragm
Inside-Out Voice Coils
Asymmetrical Horn Design
4 Digital Amplifiers
RDNet Control
RCF TTL6-A Specs
Configuration | Active 3-Way |
Total Power Capacity | 2200 W RMS |
Amplifier Power Rating | HF: 400 W RMS MF: 700 W RMS LF: 1100 W RMS |
HF Driver | 1 x 1.4" / 35.6 mm |
HF Voice Coil | 3" / 76.2 mm |
MF Driver | 4 x 6" / 152.4 mm |
MF Voice Coil | 2" / 50.8 mm |
LF Driver | 2 x 12" / 254 mm Woofer |
LF Voice Coil | 3" / 76.2 mm |
Magnet | HF: Neodymium LF: Neodymium |
Frequency Response | 45 Hz to 20 kHz -3 dB |
Maximum SPL | 139 dB |
Coverage Angle | 90° H x 30° V |
Input Sensitivity | +4 dBu |
Protections | Thermal |
Audio I/O | 1 x XLR 3-Pin Input 1 x XLR 3-Pin Output |
Network I/O | 1 x etherCON (RDNet) Input 1 x etherCON (RDNet) Output |
Crossover | Low-Pass: 200 Hz High-Pass: 800 Hz |
Dynamic Processing | Soft Limiter |
AC Power Connector | 1 x powerCON Input 1 x powerCON Output |
Mounting | Pole Socket |
Handles | 2 x Side 2 x Rear |
Cooling | Convection |
Construction Material | Plywood |
Dimensions | 43.3 x 14.9 x 18.4" / 1100 x 378 x 468 mm |
Weight | 116.8 lb / 53 kg |