The Yamaha DZR12 offers superb clarity and best-in-class SPL performance.

This 2-way bi-amped PA speaker boasts a high-power 2,000-watt Class D amplifier, a 39Hz-20kHz frequency range, and can tackle any application you throw at it. Sophisticated DSP processing yields high-resolution sound with super-low latency, while optimized presets and an intuitive LCD display make dialing in your settings a piece of cake. As a powered PA speaker, this loudspeaker integrates with any configuration. It can also operate effectively as a stage monitor. It employs a lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating.

Sophisticated DSP processing
Yamaha's Advanced FIR-X tuning employs a combination of FIR filtering and corrective EQ to minimize phase distortion, ensuring smooth frequency response, stunning clarity, and accurate sound imaging. D-Contour is an intelligent multiband compressor that maintains the ultimate in clarity, even when you push it to its highest output level. D-Contour features two settings, FOH/MAIN and MONITOR mode, allowing you to fine-tune the sound based on your application. You also get DSP protection that safeguards your power supply, power amplifiers, and transducers against damage. Despite all this powerful DSP, it remains easy to use, thanks to optimized factory presets and an intuitive LCD screen.

Custom-designed transducers
This loudspeaker is loaded with great-sounding, custom-designed transducers. Its high-frequency transducer includes a 2-inch voice coil and 1-inch throat compression driver, a titanium diaphragm, and neodymium magnet housed in a heat-resistant aluminum-cast frame. Its low-frequency transducer uses a large 3-inch voice coil, cast-aluminum frame, and powerful, yet lightweight, neodymium magnet to handle the chest-thumping low end that it delivers. This loudspeaker isn't just all about power, however. Its low-end response is tightly controlled, especially in the mid-bass and vocal range, assuring crystal-clear sound reproduction - even at cranked volumes.

Smart, ultra-flexible design
This loudspeaker integrates with any configuration, thanks to its ultra-flexible design. Its rotatable horn allows vertical or horizontal mounting. Benefit from a 90x60° dispersion from a vertical position. Enjoy smooth, level coverage, by virtue of the constant directivity horn - its innovative design minimizes the roll-off that conventional horns often produce.

High-power Class D amplifier
Loaded with 2,000 watts of Class D power, this loudspeaker is a beast. It delivers an impressive 139dB SPL, so go ahead and crank it up - the DZR12 can take it. Enjoy maximum power, along with stable, worry-free operation, thanks to a universal switching mode power supply. Beyond that, this amp was optimized to match the transducers, ensuring top-tier sound quality.

Features

• 2-way powered loudspeaker with 2" HF and 12" LF drivers
• Boasts a high-power 2,000-watt Class D amplifier and 39Hz-20kHz frequency range
• Advanced FIR-X tuning employs a combination of FIR filtering and corrective EQ to minimize phase distortion
• D-Contour is an intelligent multiband compressor that maintains clarity at high output levels
• FOH/MAIN and MONITOR modes allow you to fine-tune your sound based on your application
• DSP protection safeguards your power supply, power amplifiers, and transducers against damage
• Optimized factory presets and intuitive LCD screen make operation easy
• Great-sounding, custom-designed transducers
• Rotatable horn allows vertical or horizontal mounting
• 90x60° dispersion from a vertical position
• Constant directivity horn supplies smooth, level coverage without roll-off
• Universal switching mode power supply offers maximum power, along with stable, worry-free operation
• Lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating

Specifications

• Speaker Type: 2-way, Bi-amped Powered Speaker, Bass-reflex
• Frequency Range: 39Hz - 20kHz
• Coverage Area: H90? x V60? (Rotatable)
• Components: LF: 15" cone, 2.5" voice coil, HF: 2" Voice Coil, 1" Throat Compression Driver, Titanium diaphragm, Neodymium magnet
• Crossover: 1.8kHz (FIR-X)
• Sampling Frequency Rate: 96kHz and FIR Filter
• A/D D/A Converters: 96kHz AD/DA
• Maximum output level (1m; on axis): 139dB SPL *1
• Power Rating: Dynamic: 2000W (LF:1000W, MF/HF: 1000W) *2, Continuous: 1300W (LF: 920W, MF/HF: 380W)
• Analog I/O: Analog IN: Combo x2, Line level (Maximum +24dBu), Input impedance 20kO,
• Analog Out: XLR3-32 x2, CH1: THRU (fix), CH2: THRU or DSP OUT
• Others: USB2.0 Host 5V 500mA for USB memory DATA storage/load
• AC: IEC AC inlet x1 (V-Lock)
• Amplifier class: Class-D
• Cooling: Fan cooling, Variable speeds
• Power consumption: 45W (Idle), 150W (1/8)
• Handle: Aluminium die-cast, Side x2
• Rigging: M10 x12
• Dimensions, with rubber feet (W x H x D): 410 mm (16.1") x 646 mm (25.4") x 394 mm (15.5")
• Net weight: 21.4kg (47.2lbs)
• Enclosure Material, Finish, Colour: Plywood, Durable Polyurea Painting, Black
• Floor Monitor Angle: 50 degree Symmetrical
• Pole socket diameter: 35 mm x2 (0 degree or -7 degree)