TASCAM's TM-280 is a high-performance, studio quality condenser microphone that features:
- switchable high-pass filter : allows the user to reduce rumble and eliminate low frequency energy when needed
- -10dB pad: drops the input volume when your signal is loud enough to distort the recording
These features, when combined with the pure gold-sputtered diaphragm, allows the TM-280 to gracefully capture performances ranging from a delicate acoustic session to the powerful levels of electric guitars, horns, percussion and drum kit overheads. And, while the TM-280 may be complex and sensitive on the inside, it is tough on the outside and built to last. Its premium components are protected by a durable internal construction on a stout framework, then encased in an aluminum shell and sturdy microphone mesh.
TASCAM has also ensured that this mic comes ready to rock by including a well-engineered shockmount with an integrated pop screen and a protective flight case.
Large Diaphragm – Ideal for vocal applications, the large, gold-plated 34mm diaphragm provides high sensitivity, low noise, and pristine clarity.
Cardioid (unidirectional) Polar Pattern – Provides precise directional focus and increases the rejection of signal bleed.
80dB SN Ratio – This top-performing spec is achieved by using high-end components and ensures ultra low-noise operation.
-10dB Switch – When engaged, the -10db cut is used to help prevent clipping when recording high level sources.
Low-Cut Filter Switch - The selectable Low-Cut filter is used to eliminate low-end noise for a cleaner mix.
Shockmount and Pop Filter – These included essential tools are used to eliminate plosives and reduce unwanted traffic noise.
Specifications
| Mircrophone type |
Condenser |
| Diaphragm |
34mm Pure Gold-sputtered |
| Polar Pattern |
Cardioid (Unidirectional) |
| Frequency response |
20Hz to 20,000Hz |
| Output impedance |
50Ω +/-30% |
| Load impedance |
> 1kΩ |
| Sensitivity |
-36dB +/-2dB (0dB=1V/Pa at 1kHz) |
| Max. SPL |
135dB |
| S/N ratio |
80dB |
| Connector |
3 pin XLR, Male × 1 |
| Phantom power requirements |
48V |
| Dimensions |
1.98" × 7.4" |
| Weight |
14.7 oz. |
| Included accessories |
Suspension shockmount (5/8" fitting), Pop filter, Flight case, 5/8" to 3/8" conversion adapter |
