logo

SurgeX UPS-3000-LI-ISO Line Interactive UPS With Isolation Transformer 208/230V 4U

Brand Image
UPCN/A
SKUUPS-3000-LI-ISO
CA$9479.00
Online financing options available at checkout
Receive 47395 points! Get a 10% discount by reaching 25,000 points
1

Available Online

Usually 1-2 weeks before shipment

Not In-Store

In case of additional delays, you will be contacted by one of our sales representative.

Any questions? We are here to help.

Description

The UPS-3000-Li-ISO shall be a four-rack-space or tower line interactive UPS unit in a steel and plastic enclosure. It shall operate at 208 volts In, 230V volts and 115V Out at both 50 or 60Hz and have a 6-foot, grounded, 3-wire #14 line cord. There shall be 1 grounded AC receptacles on the back panel. This unit can accommodate additional battery cabinets to extend its autonomous run time. Overall dimensions shall be 20.7" W x 17.26" D x 6.89" H. Weight shall be 1422 pounds. The UPS-3000-Li-ISO shall have a total load rating of 2760VA / 2484 Watts. This unit can accommodate an optional SNMP network card for unit monitoring and shutdown.

The UPS also contains a low impedance isolation transformer that constantly filters and conditions the power supply. Preventing electrical noise from affecting performance, delivering clean, fully conditioned power to the source, and stopping harmful harmonics from reaching sensitive loads. It ensures a fully conditioned, safely managed interface between your equipment and the electrical supply.

Features

  • Line Interactive technology
  • Low impedance isolation transformer
  • 0.9 output power factor with true sine-wave output
  • Auto battery test and user hot-swappable battery
  • Advanced SNMP communication capability
  • User-friendly GUI interface and diagnostics

Specifications

Type Standard
Power Rating (VA/Watts) 2760 / 2484
Inverter Waveform Low Distortion Sine Wave
Transfer Time 4 ms. Typical
Frequency 50 / 60 Hz.
BTU/Hr. 446
T.H.D. Max. w/100% Resistive Load <4% On Battery
Online Efficiency (w/o Charger) 95%
Input Voltage 208
Input Current 16.0 Amps
Output Voltage 230 and 115
Output Current (VA/Watts) 12.0 / 11.5 and 24.0 / 21.6 Amps
Input Voltage Range (w/o Using Battery) 166 to 250 Volts
Output Regulation (On Mains) + 10%
Output Regulation (On Battery) + 5%
Backup Time at Full Load (0.7 P.F) 6 Minutes
Floor Mountable Yes (Optional)
Communications Interface DB9, USB (SNMP Optional)
Shipping Weight (lbs./kg) 142 lbs. / 64.4 kg
Dimensions (in/mm) L x W x H 20.7 x 17.26 x 6.89 /
525.77 x 438.23 x 175.00
Output Receptacle Eight (8) NEMA 5-20 and (1) NEMA
L6-20 Receptacles
PDU Compatible Yes
Warranty
Estimated shipping calculator

Enter details above

Discover our promotions