| Power Handling Capacity (Tap 1 @ 100 V) |
50 W |
| Power Handling Capacity (Tap 2 @ 100 V |
25 W |
| Power Handling Capacity (Tap 3 @ 100 V) |
12.5 W |
| Sensitivity 50 W/1 m (Full Space, 100 Hz - 20 kHz) |
112 dB |
| Sensitivity 50 W/4 m (Full Space, 100 Hz - 20 kHz) |
100 dB |
| Frequency range -10 dB |
84 Hz - 20 kHz |
| Max SPL @ 1 m (10 % THD, EN 60268-21) |
112 dB |
| Max SPL (Rated Power / 4 m / EN 54-24 Signal) |
101 dB |
| Directivity (horizontal x vertical) |
Depends on horn variation |
| Nominal impedance (Depending on Tap) |
100 ohms, 200 ohms, or 400 ohms |
| Components |
- Low frequency: 1 x 8-inch with 1.75-inch voice coil and ferrite magnet
- High frequency: 1 x 1-inch with 1.4-inch voice coil with neodymium magnet and ferrofluid
- Crossover: High pass: 12 dB/oct., Low pass: 12 dB/oct.
- Horn: 60° x 40° or 90° x 55° or 60-90° x 55° (asymmetrical), each rotatable by 90°
|
| DSP filters |
Graf & Meyer eXentro, Lab.gruppen IPD/D-series, or filter spread sheets |
| Connections |
- Input: 1x Speakon NL4,
- Output/parallel output: 2x Screw terminals with contact protection cover
- Pin assignement: 1+/- (Input)
|
| Mounting points |
4 x M10 (Side), 6 x M10 (Lid/bottom), 3 x M10 (Back) |
| Cabinet material |
Birch plywood |
| Front grille |
Steel front grille with anticorrosive coating and with external acoustic fabric, flame retardant as standard |
| Finish |
Two-component coating, black and white as standard, over 40 colors possible |
| Certifications |
IP 66 (EN 60529), ball impact resistance (DIN 18032-3), Voice alarms (EN 54-24:2008)
|
| Optional accessories |
U-bracket, tilt unit, wall plate, cluster plates, and AP-10 B mounting point |
| Dimensions (W x H x D) |
239 x 490 x 295 mm / 9.41 x 19.29 x 11.61 in |
| Weight |
12.7 kg / 28.25 lbs |