The D2P is a headphone monitoring solution when two users sit next to each other and need to monitor one or two stereo sources.  The two stereo sources come from the Dante/AES67 network and can be mixed for monitoring.  Each of the stereo inputs can be routed to either headphone amp or both.  This allows the users of a D2P to share the same stereo mix, or just monitor an induvial stereo input each.  Each user also has their own mute button. 

The D2P features Glensound’s auto impedance load balancing system to allow consistent gain ranges across the pot when using headphones between 32-1000 ohms.

Specifications

• Two independent stereo headphone amplifiers:
• Headphone Impedance: 32 - 1000 Ohms
  
• Max output level:+15.5dBu into 600 Ohms
  
• Headphone connectors:6.35mm TRS or 3.5mm TRS
  
• Pot Range:-80dB to 0dB
  
• Frequency response:0.2dB 20Hz to 22kHz
  
• Noise:-83dBu @ 0dBu output (into 600R)

NETWORK

• Dante:Yes - UltimoX4 based
  
• AES67 Compliant:Yes
  
• SMPTE ST-2110-30 Compliant:No
  
• Copper ethernet:Neutrik EtherCON connector
  
• Fibre ethernet:No
  
• Audio Sampling Frequency:44.1kHz & 48kHz
  
• Transfer rate:100Mbps
  
• Resolution:24 bit
  
• Line up:0dBu = -18dBFs

POWER

• PoE powered
  
• Complies to IEE 802.3af
  
• Classification Class 0
  
• Consumption:Typical = 2W

PHYSICAL

• Size:150mm x 171mm x 81mm (WxDxH)
  
• Mechanics:Aluminium construction, anodized and laser etched, powder coated sides