The M4 by Dynaudio Acoustics is a high quality, high-power loudspeaker system for use in large music studio monitoring applications.

It’s been designed to provide accurate, distortion-free monitoring at high power levels – maintaining exceptional quality at all times under all drive conditions.

The bass section consists of four 300mm MSP (Magnesium Silicate Polymer) drivers with 100mm ferrofluid-cooled voice coils. The low-mid section uses two 170mm MSP drivers with 75mm voice coils and neodymium magnets. The upper-midrange driver is a 54mm critically doped fabric dome Esotar model that ensures low distortion and excellent transient response. And the high-frequency unit is the legendary Estorar 3, designed to reproduce distortion-free transients of up to 1000 watts. Both Esotar units are fitted with enhanced double-magnet motors, and a high-power passive crossover links the high-mid and tweeter.

If you’ve a smaller room, you can also order a compact version of the system with two bass drivers.

Specifications

• Status: Current
• Segment: Pro
• Series: Dynaudio Acoustics
• Application: Music recording and mixing
• Type: 4-way hybrid
• Frequency response: 35Hz – 20kHz
• Maximum SPL at 2 metre: 130dB stereo
• Crossover frequencies: 250Hz, 2kHz, 5kHz
• Total harmonic distortion: 1% at 90dB
• Recommended amplifier power: Four channels: 500-1000W/channel per speaker
• Cabinet dimensions (H x W x D): 900 x 850 x 680mm
• Weight kg: 97kg
• Finish: Black textured paint
• High frequency driver: Esotar 3
• High mid driver: 56mm soft dome
• Low mid driver: 2x 17cm MSP
• Low frequency driver: 4x 30cm MSP
• Amplifier recommendation: Dynaudio Acoustics DA40/80 DSP, DCA800/1400
• Optional: Hardwood cabinet Oak, cherry, walnut, maple