Dbx 560A 500 Series Compressorlimiter

by DBX
$289.99

QUESTIONS? ASK AN EXPERT

☏ +1(514) 225-2226 | ✉ sales@musicredone.com | ⌨ Chat With Us!

✔ USUALLY SHIPS WITHIN 24 HOURS


dbx DBX560A overview

 

The 500 Series 560A Compressor/Limiter from DBX offers VCA-based compression with the switch-selectable OverEasy and Hard Knee compression curves. With a wide-ranging threshold, ratio and output controls and true RMS level detection, the compressor provides natural-sounding dynamics. The 560A will provide much needed punch to drums, bass, vocals and also subtle compression to "brick wall” peak limiting.

 

Choose low ratios and OverEasy compression to expertly smooth out fluctuating vocal and instrumental levels, or use the 560A's Hard Knee compression and high ratios for protection against overload distortion in digital recording, P.A. systems, and broadcast signals.

The 19-segment, switchable Input/Output LEDs and 12-segment Gain Reduction LEDs provide precise analysis at a glance. And, the INFINITY+ inverse-compression mode actually decreases the audio output level below unity gain when the input exceeds threshold, correcting overbearing vocal choruses and controlling runaway mix levels.

OverEasy or classic hard knee compression with ultra-musical program dependent attack and release times
Compression ratio variable from 1:1 through infinity:1 to -1:1
Precise RMS gain reduction and input/output meter displays with calibration control for different operating levels
True RMS level detection
Infinity+ compression using negative ratios

dbx DBX560A specs

Input Type Electronically balanced/unbalanced, RF filtered
Input Impedance 40 kOhms balanced, 20 kOhms unbalanced
Maximum Input Level +22 dBu
CMRR >40 dB; typically >55 dB at 1 kHz
Output Type Electronically balanced/unbalanced, RF filtered
Output Impedance Balanced 30 ohms, unbalanced 15 ohms
Maximum Output Level +22 dBu
Frequency Response 20 Hz - 20 kHz, + 0/-0.5 dB; 0.5 Hz - 100 kHz, +0/-3 dB
Noise <-97 dBu, unweighted (22 Hz - 22 kHz)
THD+N <0.005% typical, no compression, 1 kHz input at 0 dBu; <0.07% typical, any amount of compression up to 40 dB @ 1 kHz
Dynamic Range >119 dB
Gain Adjustment Range Variable from -20 dB to +20 dB
Compressor Threshold -40 dBu to +20 dBu
Threshold Selectable OverEasy or Hard Knee
Ratio Variable 1:1 to infinity:1 thru to -1:1; 60 dB maximum compression
Attack Time Program-Dependent; typically 15 ms for 10 dB, 5 ms for 20 dB, 3 ms for 30 dB
Release Time Program-Dependent; typically 8 ms for 1 dB, 80 ms for 10 dB, 400 ms for 50 dB; 125 dB/Sec Rate
Power Requirements +/- 16 VDC
Current Draw 60 mA per power rail
Power Draw 1.92 W
Rack Compatibility 500 Series compatible power-frame
Rack Space 1 slot
Dimensions (H x W x D) 5.25 x 1.5 x 6" (13.34 x 3.81 x 15.24 cm)
Weight 1.3 lb (0.59 kg)

UPC: 691991000638