FEATURES
The Audix D2 Trio (3-Pack) is well suited for use in stage, studio, and broadcast applications, and features the frequency and sensitivity response required for accurately reproducing signals from drums and percussion instruments. This package comes with everything you need for miking your toms. The mic has a dynamic element capable of reproducing signals with high transient peaks, while maintaining a clear, punchy, and warm sound.
The D2 offers a frequency response of 68 Hz to 18 kHz which features a slight bump in the mid-bass frequencies. The contoured mid-bass response accentuates the tonal frequencies associated with instruments that have a percussive nature, such as rack toms, congas, floor toms, saxophone, brass, horns, as well as guitar and bass cabinets. The hypercardioid polar pattern provides a tight pickup area at the front of the capsule for isolation and feedback control, and it is equipped with a VLM (Very Low Mass) diaphragm for natural, accurate sound reproduction. Ambiance and noise at the off-axis sections of the microphone are greatly reduced, resulting in high signal-to-noise ratio.
SPECIFICATIONS
- Transducer Dynamic VLM Type B (Transformerless)
- Polar Pattern Hypercardioid
- Frequency Response 68 Hz to 18 kHz
- Sensitivity 1.2 mV / Pa @ 1 kHz
- Off Axis Rejection >30 dB
- Maximum SPL ≥144 dB
- Power Requirements Dynamic Transducer - no external power required
- Impedance 280 ohms
- Output Connectors 3-pin XLR male
- Pad No
- Low Frequency Roll-Off Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
- Dimensions 3.9" (100 mm)
- Weight 4.5 oz (128 g)
- Package Weight 2.55 lb
- Box Dimensions (LxWxH) 9.7 x 5.8 x 3.9"
