Wharfedale WLA-28A Active Line Array Speaker - 2 x 8″

Name: Wharfedale WLA-28A Active Line Array Speaker - 2 x 8″
Brand: RedOne Music Canada

UPCN/A

SKUWD-WLA-28A

CA$1874.00

Online financing options available at checkout

Receive 9370 points! Get a 10% discount by reaching 25,000 points

Available Online

Usually 1-2 weeks before shipment

Not In-Store

Visit Us

In case of additional delays, you will be contacted by one of our sales representative.

Any questions? We are here to help.

1-(888)-733-6631 Visit Help Center

Description

The quality and durability of the well established WLA series is now available in an active series.   Using Class D amplification, this new series is enhanced with rear panel internal DSP using FIR presets. Ethernet control also delivers remote system management tools through a single cable.

The line-up consists of a 2 x 8” array element, two active floor monitors, a 2 x15” flown subwoofer and the 2000 W continuous WLA-218BA dual 18” subwoofer. A combination which allows for comprehensive systems to be designed, installed and toured.

The system is also compatible with the WLA-28 Common Fly Frame and WLA-28 Dolly Frame and can also be protected using the readily available WLA Series tourbags.

Class D amplification
Internal DSP presets including FIR
Birch plywood construction
Integral rigging system
powerCON connectivity
Ethernet system control
Matching 12″ and 15″ active floor monitors
The durability of the classic passive WLA series…..but ACTIVE !

INTERNAL DSP WITH FIR
8 x DSP Presets – built in – including FIR. Easy to get great results – fast. For the subwoofers (WLA-28SUBA and WLA-218BA) the AUDIENCE or STAGE presets can be used in an Inverted Stack Gradient array configuration.

SOFTWARE CONTROL
The network connection uses RS485 protocol and gives GUI control over the DSP parameters of each element in the array.

DUAL 8″
At the heart of the WLA-28A are 2 x 8″ custom Wharfedale Pro LF drivers. These feature 2.0″ voice coils to ensure high efficiency and high power handling. These perfectly matched custom transducers are what give a WLA-28A system that special sonic impact.

ABOUT THE CLARITY
The new neo HF compression driver delivers additional clarity and performance with enhanced definition. It is custom-made by Wharfedale Pro and is coupled to a 100° x 10° waveguide.

SPECIFICATIONS

System Type	Active 8” 2-way Bi-Amplified
Frequency Response (+/-3 dB)	60 Hz – 20 KHz
Frequency Range (-10 dB)	55 Hz – 20 KHz
Loudspeaker Sensitivity @ 1 W / 1 m)	100 dB
Maximum SPL(peak)(@1 m)	132 dB
Nominal Coverage (H x V)	100° x 10°
Signal Processing	DSP based, 8 FIR presets resident in Input Module
Preset list	A) 1 SPKR 100 Hz HPF B) 2 to 4 SPKR 100 Hz HPF C) 4 to 8 SPKR 100 Hz HPF D) >8 SPKR 100 Hz HPF E) 2 to 4 SPKR F) 4 to 8 SPKR G) >8 SPKR H) CUSTOM
Amplifiers
Amplifier Design	Class D
Power Rating:	1500 W Peak (1300 W LF + 200 W HF), 750 W Continuous (650 W LF + 100 W HF)
Power On Protection	Power switch on/off mute
Thermal Protection	Amplifier Shut Down. Auto Reset
Low Line Voltage Shut Down	80% Nominal Line Voltage
Driver Protection	Independent L/ H Limiters and DC
DC and Short Protection	Yes
Limiter Indicator	Red LED
Signal Indicator	Green LED
Power/Active Indicator	White LED
Find Function Indicator	Blue LED
Input Sensitivity	+4 dBu
Maximum Input Level	+18 dBu

Input Impedance	Balanced: 10 KΩ
AC Power details – Power Supply	High Efficiency Switching Mode Power Supply
Connectors
Input Connector	XLR 1/ 4〞Combo jack
Link Connector	Balanced XLR pin Connector
UPDATE	USB Type B
NETWORK (RS485)	RJ45
AC Power Options	AC 100-120 V~/ 220-240 V~,50/60 HZ
AC Input Connector	powerCON
AC Loop Through Connector	powerCON
Hardware – Rigging	Integral side plate adjustable rigging 0°-10°
Enclosure Material and finish	15 mm / 18 mm Plywood
Colour Options	Black Rhino Paint
Grille Material & Finish	1.5 Steel
Unpacked dimensions – Height	250 mm / 9.84″ 181 mm / 7.1″
Width (Front)	760 mm / 29.92″
Width (Back)	760 mm / 29.92″
Depth	463.2 mm / 18.23″
Packed Dimensions – Height	320 mm / 12.6″
Width (Front)	830 mm / 32.7″
Width (Back)	830 mm / 32.7″
Depth	534 mm / 21.0″
Net Weight (Kg / lbs)	30.2 Kg / 66.4 lbs
Gross Weight (Kg / lbs)	32.5 Kg / 71.5 lbs

Warranty

Estimated shipping calculator