205 x 86 x 50mm (8.07 x 3.38 x 1.97”); 971 grams (2.14 lbs.) - weight and dimensions of power supply only, not including cables or packaging.
Input Voltage
The 1 SPOT Pro CS11 can be used anywhere in the world without the use of a step-up or step-down transformer. Like our 1 SPOT, it transforms wall voltage from 100-240Vac, and converts it into the stated voltages on the bottom of the unit.
Cables
The 1 SPOT Pro CS11 includes a generous assortment of cables and converter plugs. The cables are of various lengths, color-coded for easy cable management and with right angle plugs on the pedal end.
Power cables (all are center pin negative polarity):
- (2) DC26 (5.5x2.1mm barrel plugs; 26” (660mm) – Purple
- (2) DC22 (5.5x2.1mm barrel plugs; 22” (559mm) – Blue
- (4) DC18 (5.5x2.1mm barrel plugs; 18” (457mm) – White
- (3) DC12 (5.5x2.1mm barrel plugs; 12” (305mm) – Yellow
- (1) MC2 Two 5.5x2.1mm barrel plugs with 5.5x2.1mm input socket.
Converter Plugs:
- (1) CL6 – (5.5x2.1mm barrel input, 5.5x2.5 barrel output; reverse polarity) Green – for Line 6 DL4/M9/etc. and some Eventide pedals.
- (1) CYR – (5.5x2.1mm barrel input, 5.5x2.1 barrel output; reverse polarity) Red – reverse polarity converter
- (1) C35 – (5.5x2.1mm barrel input, 3.5mm male output; tip positive) Black – 3.5mm (1/8”) plug converter
- (1) CBAT – (5.5x2.1mm barrel input, Black battery clip output) Connects to battery clip wires inside pedals that do not have DC jacks. Do NOT connect to a battery!
- (1) C2.5 – Gray – 5.5x2.5mm plug converter - can be used for Line 6 HX series and POD Go
Available Output Voltages
- Outputs 1-2, 10-11: 9VDC (500mA)
- Outputs 3-4: 9VDC or 18VDC (100mA)
- Outputs 5-6: 9VDC or 12VDC (250mA)
- Outputs 7-9: 9VDC (250mA)
