Shure ULXD1-H50 VHF Wireless Bodypack Transmitter H50 Frequency
The Shure ULXD1 VHF Wireless Bodypack Transmitter is a lavalier, headworn microphone and instrument transmitter for hands-free wireless microphone and instrument operation (microphones and instrument cables sold separately). The ULXD1 is sold as part of the ULX-D Digital Wireless Microphone System, or may be purchased separately and used with an existing ULXD4 digital wireless receiver.
The compact bodypack transmitter features a rugged metal housing, TA4-M (4-pin male) audio input, comprehensive LCD display and much more. The ULXD1 features pristine, compandor-free digital transmission for uncompromising sound quality, range and detail. Its 256-bit encryption keeps wireless transmissions secure, and its adjustable RF output power delivers maximum range wherever necessary. The ULXD1 operates on either alkaline AA batteries or Li-Ion rechargeable batteries for up to 12 hours.
Features
- AES 256-bit encryption for applications requiring secure data transmission
- Proprietary Shure gain ranging optimizes the system's dynamic range for any input source, eliminating the need for transmitter gain adjustments
- Shure SB900 Lithium-Ion rechargeable battery provides up to 12 hours of battery life, precision metering with 5-segment battery fuel gauge, and zero memory effect
- External charging contacts for docked charging (with the SBC200 dual docking charger)
- Backlit LCD with easy to navigate menu and controls
- Rugged metal construction
- Detachable 1/4 wave antenna
- Frequency and power lockout
Specifications
- Connector TA4F connector
- Unbalanced
- 1 MOhm
- Impedance 50 Ohms
- Operating Range 300' (100 m)
- Gain Range 0 to 21 dB (in 3 dB steps)
- Line Max Input Level Pad Off: 8.5 dBV (7.5 Vpp)
- Pad On: 20.5 dBV (30 Vpp)
- EIN Preamplifier Equivalent Input Noise (EIN), System Gain Setting = +20: 120 dBV, A-weighted, typical
- RF Output SMA
- Antenna 1/4 wave
- Bandwidth Occupied Bandwidth: < 200 kHz
- Modulation Shure Proprietary Digital
- Output Power 1 mW, 10 mW, 20 mW
- Frequency Response 20 Hz to 20 kHz (±1 dB), flat
- Note: Dependent on microphone type
- Battery Shure SB900 Rechargeable Li-Ion or AA batteries
- Battery Runtime @ 10 mW:
- Shure SB900: > 12 hours
- Alkaline: 11 hours
- Housing Cast aluminum
- Dimensions (HxWxD) 3.4 x 2.6 x 0.9" (86 x 66 x 23 mm)
- Weight 142 g (5.0 oz), without batteries
- Package Weight 0.95 lb
- Box Dimensions (LxWxH) 12.7 x 4.8 x 3.4"
Shure ULXD4-H50 Digital Wireless Receiver Frequency H50
The Shure ULXD4 is a half-rack, networkable wireless receiver for use with ULX-D® Digital Wireless Systems.
With an expansive set of professional features, including 24-bit / 48 kHz digital audio quality, efficient and intelligent RF performance, and AES 256-bit encryption, ULX Digital offers uncompromising wireless tailored for professional sound reinforcement.
Specifications
- Predictive switching diversity
- High Density mode optimizes ULX-D systems to simultaneously operate significantly more channels in applications up to 30 meters
- Intelligent scanning automatically finds and deploys the cleanest frequencies to transmitters over IR sync
- Interference detection and alerts provided on both the receiver and Wireless Workbench® 6
- Front panel gain adjustment buttons provide up to 60 dB additional gain
- AES 256-bit encryption-enabled for applications where secure transmission is needed
- Ethernet networking provides streamlined setup across multiple receivers, Wireless Workbench® 6 integration, and AMX/Crestron control
- Support for frequency coordination with the Axient® Spectrum Manager
- Yamaha® device ID allows simplified channel patching on CL consoles
- Rugged metal chassis
- Intuitive front panel LCD menu and controls with lockout feature
- Upgraded LCD with adjustable contrast and brightness
- Audio and RF LED meters with peak indicator
- Remoteable ½ wave antennas
- Furnished rack hardware
Note: When purchasing separate wireless components, please match their frequency bands to ensure proper system operation.
Shure WL185MB/C-LM3 Low-Profile Cardioid Lavalier Microphone with LEMO 3-Pin Connector (Black)
The black Shure WL185m is a discreet, low-profile cardioid lavalier microphone well suited to a wide variety of interview, presentation, broadcast, and film/video applications. The mic features a 3-pin LEMO connector compatible with select Shure wireless transmitters. Not only does the lav offer a profile that is 8mm shorter then previous models, the WL185m delivers better audio quality with an improved presence response, higher dynamic range, and lower self-noise for crystal clear speech and vocals.
The electret condenser capsule filters out unwanted low frequencies below 70 Hz and delivers a high-end response up to 20 kHz to provide clear, intelligible speech for instructors, journalists, and presenters doing interviews, voiceovers, and dialog. The diaphragm can handle SPL levels up to 134 dB, while the cardioid pickup pattern focuses audio capture on the talent wearing the mic, picking up less audio from surrounding sources and helping to reduce feedback from sound-reinforcement equipment.
Optimized for a 5 VDC plug-in power source, the mic features a 4' cable terminating in a 3-pin LEMO connector for use with a compatible Shure wireless bodypack transmitter or similar device. A snap-fit windscreen and adjustable lapel clip that offers 90° rotation for optimal mic placement are included. A zippered storage pouch is also supplied.
-
Shure: works with Shure transmitters equipped with a LEMO 3-pin connector, including the following models: AD1, ADX1, ADX1M, and ULXD1
-
Third-party devices: the WL185m will work with third-party wireless transmitters that are equipped to supply 5 VDC through a LEMO 3-pin connector
Specifications
Microphone
| Form Factor |
Lavalier
|
| Compatible Transmitters |
Shure: Axient AD1, Axient ADX1, Axient ADX1M, ULXD1
|
| Intended Sound Sources |
Vocals, Speech/Voice-Over
|
| Sound Field |
Mono
|
| Element Type |
1x Electret Condenser
|
| Polar Pattern |
Cardioid
|
| Included Tone Caps |
No
|
Performance
| Frequency Range |
70 Hz to 20 kHz
|
| Maximum SPL |
134 dB SPL (1% THD)
|
| Sensitivity |
-37 dBV/Pa
|
| Dynamic Range |
114.5 dB
|
| Signal-to-Noise Ratio |
74.5 dB
|
Connectivity
| Output Connector |
1x LEMO 3-Pin
|
| Cable Length |
4' / 1.22 m
|
Power
| Power Sources |
Plug-In Power
|
| Operating Voltage |
5 V (Plug-In Power)
|
Physical
| Color |
Black
|
| Construction Material |
Aluminum
|
| Dimensions |
ø: 0.5 x L: 0.53" / ø: 12.74 x L: 13.55 mm
|
| Weight |
0.7 oz / 20 g (with Cable)
|
Packaging Info
| Package Weight |
0.37 lb
|
| Box Dimensions (LxWxH) |
6.2 x 6 x 1.7"
|