The Quest RM6 is an optional 6-Zones paging microphone with built-in chime for use with PR-130A/BT and PR-240A/BT.

Specifications

• Audio Output -  0dB (Balanced)
• Audio Input -  -36 dB ±3 dB (Balanced) 
• Frequency Response -  80Hz~15kHz (-1 dB)
• S/N Ratio -  Better than 90dB
• Total Harmonic Distortion (T.H.D.) -  Less than 0.5%
• Serial Interface -  RS485 Max 200m (UTP CAT5/6) 
• Operating Temperature -  0° ~ +40°C
• Carton Dimensions (WxHxD) -  7.9" x 2.4" x 4.7" (200 x 60 x 120mm)
• Weight (Net) -  1.10 lbs. (0.5 kg)

Front Panel Features

• Indicators - Power (Blue), Signal (Green), Clip (Red), Busy (Red).
• MIC Input - XLR input Jack to Connect a condenser microphone.
• ALL - Select and release all zones. Press and hold for locking all zones.
• Z1 to Z6 - Individual Zone Selection - Select and release each zone 1 – 6. Press and hold for locking the selected zone.
• CHIME - Turn ON and OFF the preannouncement chime.
• TALK - Press and hold to start broadcasting after selecting the zone(s) Release the button to end broadcasting.

Rear Panel Features

• LINK - Terminals to connect to the PR-Series mixer-amplifier with UTP CAT5/6 We recommend a total distance of up to 200m between the microphone and the mixer-amplifier. Up to 4 RM6 can be connected through the LINK port
• CHIME volume - Adjust preannouncement chime volume
• MIC volume - Adjust microphone level