The M120 mixer amplifier is a complete all-in-one mixer amplifier solutions for commercial and industrial applications. These low-cost units offer all the necessary features in a simple format.
These models have a constant voltage power amplifier allowing use at 25/70V or at low impedance of 4 or 8 Ohms. The M120 can deliver a power of 120 Watts. It offers three input channels (terminal block/RCA and 3.5mm on the front panel) with independent level controls to facilitate the connection of sound sources. A music-on-hold feature is also available for businesses wishing to enhance their customers' telephone experience. So when you connect this mixer to a telecommunications system, customers can listen to music or pre-recorded messages while they wait.
Features
- Three (3) microphone inputs and two (2) line inputs (terminal block, RCA and 3.5mm on the front panel).
- Rated power output: 120 Watts.
- A 2-band tone control helps correct the overall sonic response of the PA system.
- Acceptable wide-range input level (up to 44 dB).
- Terminal block telephone paging input with volume and attenuation level controls.
- Two (2) layer priority muting.
- Music on hold (M.O.H.) output used to connect the mixer to the telephone system to play music or pre-recorded messages. This output can also be used to supply a line level signal to a power amplifier.
- Microphone inputs 1 with phantom power for connecting condenser microphones.
- Low distortion and low noise level.
- To ensure long-term reliability, M-Series mixers are equipped with a sophisticated protection circuit with current limiting to avoid problems associated with overloading and overheating.
- Compact size makes it easy to install on a work desk or in a standard 48.3 cm (19 in) rack using optional brackets.
- An ideal solution for commercial and industrial applications.
- An extended three-year warranty.
Specifications
- Rated Power Output: 120W
- Speaker Output: 4Ω/8Ω/25V/70V
- Connectors
- CH1: Mic input on balanced 3-Conductor Phoenix Connector with Phantom Power
- CH2-3: Mic input on 3-Conductor Phoenix Connector, Line input on stereo RCA
- CH3: 3.5mm stereo Aux input on front panel
- Input Sensitivity /Impedance
- MIC 1-3: '-50dB to -6dB Variable / 20 kΩ Balanced
- Line 2, 3: '-30dB to +14dB Variable / 47 kΩ Unbalanced
- Telephone-Paging: -21dB ± 3dB / 600 Ω Balanced
- Music On Hold Output Level: ∞ to +10 dB Variable / 600Ω Balanced
- Frequency Response: 80Hz - 18kHz (±3dB)
- Tone Control: ±12dB for bass and treble
- S/N Ratio: < 90 dB
- T.H.D (1 kHz): < 0.5 %
- Protection: Output Current Limiting, Thermal Protection & DC Offset Protection
- Power Supply: 110V AC, 50-60Hz
- Chassis Dimensions: 10.63" x 3.0" x 9.06" (270 x 76 x 230mm)
- Weight (Net): 12.13 lbs. (5.5 kg)
