logo

Fluid Audio IMAGE 2 3-Way Active Studio Reference Monitor (Single) - 8"

Brand Image
UPC810061210061
SKUIMAGE 2
CA$2582.90
Online financing options available at checkout
Receive 12915 points!Get a 10% discount by reaching 25,000 points
1

Available Online

Usually 1-2 weeks before shipment

Not In-Store

Visit Us

In case of additional delays, you will be contacted by one of our sales representative.

Any questions? We are here to help.

1-(888)-733-6631Visit Help Center
Description

Image 2, from Fluid Audio, is a dedicated nearfield/midfield workhorse which uses the latest DSP and class-D amplification to push the limits and create stunning results. The Image 2 delivers accurate imaging, extremely flat frequency response, and incredible bass extension with very low distortion.

With support for Sonarworks SoundID Reference calibration import, the room calibration software is integrated directly into Image 2 studio monitors,giving users the ability to create their own calibration profile for their monitor setups to remove unwanted coloration and experience the most accurate studio reference sound for any studio or home environment. The Image 2 is also a 2-in-1 monitor: A full range mixing and mastering system that can switch into cubemix mode at the press of a footswitch. Cubemix mode enables engineers to dial-in low end and midrange levels for even playback on many bass challenged devices. It further helps with the adjustment of vocals, nailing the kickdrums and overall balance.

Future-Proof USB Connection
The future-ready USB port expands the Image 2's incredible functionality and provides the ability to upload and run exported room correction files natively at the monitor level, as well switching between profiles (Image 2 supports loading of 4 different SoundID Reference profiles) and cubemix mode.
Three-Way Driver System
The newly developed AMT tweeter delivers precise, detailed response, expansive headroom, and low distortion, while the aluminum cone midrange driver utilizes a shorting ring within its motor structure to substantially reduce harmonic distortion. Focusing the magnetic flux and concentrating it within the voice coil gap reduces modulation movement of the voice coil, which makes the variation of system inductances more linear as input current varies. The end result is accuracy so clean; mixing takes on a whole new flow.

 

The opposed, dual 8" ultra-long-throw bass woofers are interlocked at their magnets from within, adding improved cabinet stability and providing extended bass response. Each bass driver is individually powered by the latest state-of-the-art 225W Class-D amplifier.

Class-D Quad Amplifier
Driving the entire system is the newly developed Class-D Quad amplifier. Spending the most development time on this important element, the Image 2 amp has extremely low self-noise, very low distortion, improved THD+N performance, improved IMD performance, and lower output impedance. The Image 2's sealed enclosure design provides a natural, 6 dB/oct roll-off for a more controlled low-frequency response. This translates into less likelihood of unwanted interaction with the room, which means these monitors are less sensitive to positioning.
Specifications
Number of Included Monitors
Single Monitor
Enclosure
Sealed
Total Power Output
675 W
Drivers
Tweeter
1x 2.2" / 55 mm Air Motion Transformer
Midrange
1x 5.1" / 13 cm Aluminum Cone
Woofer
2x 8" / 20.3 cm Cone
Amplifiers
LF: 2 x 225 W Class-D
MF: 150 W Class-D
HF: 75 W Class-D
Performance
Frequency Range
28 Hz to 20 kHz ± 4.6 dB
80 Hz to 20 kHz ± 2 dB
Maximum Sound Pressure Level (SPL)
116 dB
Signal Processing
EQ
1x LF Shelf: +2 dB
1x Mid Notch/Peak: -1 to +1 dB
1x HF Shelf: -1 to +1 dB
Crossover Frequency
115 to 2800 Hz, 6 dB/Octave Slope
Phase Adjustment
No
App-Based Signal Processing
Yes
Connectivity
Audio I/O
1x XLR 3-Pin Balanced Line Input
1x 1/4" TRS Balanced Line Input
Digital Audio I/O
1x XLR 3-Pin AES3 Input
1x RCA Coaxial S/PDIF Input
1x RCA Coaxial S/PDIF Thru
Network I/O
No
USB
1x USB-B (Remote)
Wireless
No
Mobile App Compatible
No
Power
AC Input Power
100 to 120 VAC, 60 Hz
Power Consumption
950 W
Physical
Color
Black
Monitor Orientation
Vertical
Certifications
CE, PSE
Dimensions (W x H x D)
9.5 x 13.8 x 14.3" / 24.1 x 35.1 x 36.3 cm
Weight
27.8 lb / 12.6 kg
Packaging Info
Package Weight
33.84 lb
Box Dimensions (LxWxH)
20.7 x 18.9 x 15.1"
Estimated shipping calculator

Enter details above

Discover our promotions

View All