Indicators |
Per Input: Signal Present, Clip, 48V Phantom Power, SYNC, I/O card type (IN, OUT, D-IN, D-OUT) |
Other Indicators |
LCD Display, Page Button, Select Button and LED indicators for: Global CLIP, Link/Active, RS-232 and Power |
Audio Card Slots |
8 Card Slots (A, B, C, D, E, F, G, H) |
High Speed Option Slot |
2 Card Slots |
Input |
(8) per Input Card |
Input Connectors |
Phoenix/Combicon, 3.5mm pitch |
Input Gain Range |
Nominal Gain 0 dB, electronically switchable up to +48 dB, in 6 dB steps |
Input Type |
Electronically balanced, RF filtered |
Input Impedance |
3.5 k ohm |
Max Input |
+22dBu |
CMRR |
>40 dB typical, >55 dB at 1 kHz |
Mic Preamp Phantom Power |
+48 VDC, selectable per input |
Output |
(8) per Output Card |
Output Connectors |
Phoenix/Combicon, 3.5mm pitch |
Output Type |
Electronically balanced, RF filtered |
Output Impedance |
44 Ω |
Max Output |
+20 dBu |
Dynamic Range |
107 dB unweighted, 110 dB A-weighted |
Internal Processing |
32 bit floating point |
THD+Noise |
0.0045% typical at 0 dBu, 1 kHz, 0 dB input gain |
Frequency Response |
20 Hz- 20 kHz, +/-0.50 dB |
Sample Rate |
48kHz |
GPIO Ports |
8 Control Inputs and 6 Logic Outputs (Phoenix/Combicon, 3.5mm pitch) |
Control Input Voltage |
0 to 4.5v |
Control Input Impedance |
4.7 k ohm to +5V (2-wire mode) |
Logic Output Voltage |
0 or +5V unloaded |
Logic Output Impedance |
440 ohm |
Logic Output Current |
10mA source, 60mA sink |
Relay Contact Connector |
Phoenix/Combicon, 3.5mm pitch |
Relay Contacts |
Common (C), Normally Open (NO), Normally Closed (NC) |
Relay Contact Rated Load |
0.3A at 125VAC, 1A at 30VDC |
Watchdog Output |
Phoenix/Combicon, 3.5mm pitch for failsafe control Opto-isolated |
Watchdog Output Current |
14mA maximum |
Watchdog WIthstanding Voltage |
80V maximum (Off) |
Watchdog Series Impedance |
220Ω (isolated) |
Input Delay Length |
per channel: Up to 5120ms of input delay |
Input EQ |
per channel: 4 Band Parametric |
Input Gate |
per channel: Downward Expander |
Input Signal Processing |
Two selectable Input Processing blocks per input |
Insert Types |
Advanced Feedback Suppression, Automatic Gain Control, Compressor, De-Esser, 12-Band Notch EQ, 12-Band Parametric EQ, Sub-Harmonic Synthesizer |
Ducker |
24 level priority ducker |
Routing/Mixing |
32x1 mixer on every output zone |
Output Insert Processing |
One selectable Output Processing block per output: Gain, Automatic Gain Control, Ambient Noise Compensation, Auto-Warmth™ |
Crossover |
configs: 1x1, 1x2, 1x3, 1x4 |
Crossover Filter Type |
Bessel 6, 12, 18 and 24 dB/Octave, Butterworth 6, 12, 18 and 24 dB/Octave, Linkwitz-Riley 12 and 24 dB/Octave |
Output EQ |
6 Band Parametric per channel |
Limiter Type |
dbx PeakStopPlus™ |
Output Delay Length |
Up to 5120ms of output delay |
Controls |
Ethernet, RS-232, Optional dbx ZC Wall Panels |
Power Consumption |
100V to 240VAC 50/60Hz, 120 Watts |
Dimensions |
3.5" (2U) x 19" x 15" (89mm x 483mm x 381mm) |
Unit Weight |
18.9 lbs. / 8.57 kgs. (with all audio cards installed) |