Ashly TRA4150 Rackmount 4-Channel Power Amplifier With 70V100V Transformer - 80 Watts Per Channel At 8 Ohms

Name: Ashly TRA4150 Rackmount 4-Channel Power Amplifier With 70V100V Transformer - 80 Watts Per Channel At 8 Ohms
Brand: RedOne Music Canada

UPC694970132825

SKUTRA4150

CA$2,639.00

Online financing options available at checkout

Receive 13195 points when buying this product!

Available Online

Usually 1-2 weeks before shipment

Not In-Store

Visit Us

In case of additional delays, you will be contacted by one of our sales representative.

Any questions? We are here to help.

1-(888)-733-6631 Visit Help Center

Description

Ashly TRA-4150 overview

The Ashly TRA-4150 is a 4-channel convection-cooled rackmount P.A. or installation power amplifier housed in a rugged 2RU metal chassis, offering an output of 80 Watts per channel at 8 Ohms, designed to drive 4 and 8 Ohm loads and transformer-coupled 70V and 100V lines simultaneously. The coupling transformers are internally mounted.

The TRA-4150 incorporates a switch-mode-power supply and Class-D amplifier circuitry, providing a power-efficient solution. The low-noise unit features a switchable HPF filter and selectable gain sensitivity, turn-on delay DIP switches with up to 8 seconds of delay available, and rear-mounted set-and-forget gain controls.

The TRA-4150 is equipped with an internally switchable 120V/240V power supply, extensive protection circuitry, and standard Euroblock inputs along with screw terminal outputs.

2RU rackmount 4-channel power amplifier with 80 Watts per channel power output at 8 Ohms and built-in 60W/70V transformer

Designed to simultaneously drive 4- or 8-Ohm loads and 70V/100V transformer-coupled lines

2-stage high-efficiency switched mode power supply with high power-to-weight ratio

Ultra-quiet convection-cooled operation

On-board 80Hz HPF, selectable gain sensitivity

Up to 8 sec. of turn-on delay with selectable Dip Switch complement

Comprehensive amplifier protection circuitry includes: Output Over-current, DC Output, Main Supply Rail Over-voltage, Chassis Temperature, Inrush Limiting, Mains Fuse

Front Panel Indicators include: overall power, standby, and protect; per-channel clip and signal indicators

Euroblock input connectors, Screw Terminal outputs

Ashly TRA-4150 specs

Power Rating	Stereo @ 8 Ohms: 4 x 80W per Ch. Stereo @ 4 Ohms: 4 x 150W per Ch. Stereo @ 70V: 4 x 150W per Ch. Stereo @ 100V: 4 x 150W per Ch.
Damping Factor	>200, 8-Ohm load, <1kHz
Input Sensitivity	1.5V
Input Impedance	20 kOhms, Balanced
Gain	Selectable 26dB or 36dB
Frequency Response	20 Hz - 20 kHz, +/-1.0dB
Signal-to-Noise Ratio	>105dB, 20Hz - 20kHz unweighted
Total Harmonic Distortion (THD)	<0.01% (8-Ohm load, 10dB below rated power, 20Hz - 10kHz
Input Connections	4 x Ch.1,2,3,4 3- Pin Euroblock
Output Connectors	4 x Ch.1,2,3,4 Screw Terminals
Controls Front Panel	1 x Power Switch
Controls (Rear)	4 x Gain Control Knobs 4 x Delay DIP Switches 4 x 80Hz HPF On/Off Buttons 4 x Gain Sensitivity Buttons
Indicators	1 x Blue Power On LED 1 x Yellow Standby LED 1 x Red Protect LED 4 x Red Clip LED's 12 x Green -24/-18/-12dB Signal LED's 8 x Yellow -6/-3dB Signal LED's
Cooling	Convection-cooled
Power Consumption	75W (1/8 Power Pink Noise @ 4 Ohm) Typical Current: Idle: 0.62A 1/8 Power: 1.98A
Dimensions	19 x 3.5 x 11" (483 x 89 x 279.4mm)
Weight	29.5 lb (13.4 kg)
Specialties	Adjustable Turn-On delay Switches Convection Cooling Switch-Mode Power Supply

Estimated shipping calculator