Ashly SRA-4075 Rackmount 4-Channel Power Amplifier - 40 Watts Per Channel At 8 Ohms

Ashly logo
UPC694970129979
SKUSRA4075
CA$1,719.00
Online financing options available at checkout

Receive 8595 points when buying this product

Any questions? We are here to help.

Any questions? We are here to help.

Description

Ashly SRA-4075 overview

 

The Ashly SRA-4075 is a 4-channel convection-cooled rackmount P.A. or studio power amplifier housed in a rugged 1RU metal chassis, offering an output of 40 Watts per channel at 8 Ohms, designed to drive 4 and 8 Ohm loads.

 

The SRA-4075 incorporates a switch-mode-power supply and Class-D amplifier circuitry, providing a power-efficient solution. The low-noise unit features a switchable HPF filter and selectable gain sensitivity, turn-on delay DIP switches with up to 8 seconds of delay available and dual or bridge modes of operation.

The SRA-4075 is equipped with an internally switchable 120V/240V power supply, extensive protection circuitry, and standard Euroblock inputs along with screw terminal outputs.

1RU 10 lb. lightweight rackmount 4-channelpower amplifier with 40 Watts per channel power output at 8 Ohms
Selectable Dual or Bridge Mono Operation, designed for 4- or 8-Ohm loads
2-stage high-efficiency switched mode power supply with high power-to-weight ratio
Ultra-quiet convection-cooled operation
On-board 80Hz HPF, selectable gain sensitivity
Up to 8 sec. of turn-on delay with selectable Dip Switch complement
Comprehensive amplifier protection circuitry includes: Output Over-current, DC Output, Main Supply Rail Over-voltage, Chassis Temperature, Inrush Limiting, Mains Fuse
Front Panel Indicators include: overall power, standby, and protect; per-channel clip and signal indicators
Euroblock input connectors, Screw Terminal outputs

Ashly SRA-4075 specs

Power Rating Stereo @ 8 Ohms: 4 x 40W per Ch.
Stereo @ 4 Ohms: 4 x 75W per Ch.
Mono Bridge @ 8 Ohms: 4 x 150W per Ch.
Damping Factor >200, 8-Ohm load, <1kHz
Input Sensitivity 1.5V
Input Impedance 20 kOhms, Balanced
Gain Selectable 26dB or 36dB
Frequency Response 20 Hz - 20 kHz, +/-1.0dB
Signal-to-Noise Ratio >98dB, 20Hz - 20kHz unweighted
Total Harmonic Distortion (THD) <0.01% (8-Ohm load, 10dB below rated power, 20Hz - 10kHz
Input Connections 4 x Ch.1,2,3,4 3- Pin Euroblock
Output Connectors 4 x Ch.1,2,3,4 Screw Terminals
Controls Front Panel 1 Power Switch
4 x Gain Control Knobs
Controls (Rear) 4 x Delay DIP Switches
2 x 80Hz HPF On/Off Button
2 x Gain Sensitivity Button
2 x Bridge/Stereo Mode Switch
Indicators 1 x Blue Power On LED
1 x Yellow Standby LED
1 x Red Protect LED
4 x Red Clip LED's
4 x Green Signal LED's
Cooling Convection-cooled
Power Consumption 37.5W (1/8 Power Pink Noise @ 4 Ohm)
Typical Current:
Idle: 0.52A
1/8 Power: 1.24A
Dimensions 19 x 1.75 x 11" (483 x 44.5 x 279.4mm)
Weight 10 lb (4.5 kg)
Specialties Adjustable Turn-On delay Switches
Convection Cooling
Switch-Mode Power Supply

Shipping calculator

--

New Product Releases

New product release promotional image
New product release promotional image
New product release promotional image
New product release promotional image
New product release promotional image
Promotion Banner
Promotion Banner
Promotion Banner
Promotion Banner
Promotion Banner

Featured Series

View All

Top Deals

View all
ColorKey
Steinberg