DUAL CONCENTRIC DRIVER
The 1,600-Watt 150 mm (6") version of TANNOY’s VXP Series point source loudspeakers, VXP 6’s constant directivity Dual Concentric drive unit technology ensures high power output with high sensitivity and exceptional efficiency. VXP 6 delivers precise 90º dispersion for optimum coverage, exceptional forward gain plus the added benefit of improved low-mid extension from the twin driver configuration.
PERFORMANCE APPLICATIONS
VXP 6’s trapezoidal enclosure design provides a multitude of placement options including: small scale FOH, floor monitor, delay and stage front fill deployment, and more. A blanking plate for optional VTH pole mounting is provided for placement atop a subwoofer in small-scale portable PA applications. An extensive range of optional VXP 6 high performance steel mounting hardware (available separately) includes a horizontal yoke bracket, an Omnimount* for wall and ceiling installation, and items to facilitate pole-mounting. All hardware has been tested and certified for a greater than 5:1 safety ratio – giving installers complete peace of mind.
CONSTRUCTION
Finished in a hard wearing semi matt black paint, the vented and internally braced cabinet is constructed from 12 mm (1/2") birch plywood – and includes a rugged powder coated perforated steel mesh grille. The rear panel connector plate carries a switch for selecting between full range (FR) or high pass filter (HPF) operation, and fully balanced input and link output on Neutrik* XLR connectors for input and link connections to additional powered enclosures. A secure locking Neutrik powerCON* connector delivers mains power to the electronics, with a selection switch for either manual (MAN) or auto (AUTO) operation. VXP 6 loudspeakers are optimized for use LAKE LM Series controllers, and a full range of DSP settings to suit many configurations is available for free download at tannoy.com.
SYSTEM
| Frequency response (Full range mode) |
88 Hz - 35 kHz ±3 dB80 Hz - 45 kHz -10 dB
|
| Frequency response (Hi-pass mode) |
120 Hz - 35 kHz ±3 dB100 Hz - 45 kHz -10 dB
|
| Nominal dispersion |
90° conical @ -6dB point
|
| Directivity factor (Q) |
5.6
|
| Directivity index (DI) |
7
|
| Dynamic range |
106 dB
|
| Maximum SPL |
123 dB peak
|
| Crossover type |
Passive 1.6 kHz with dynamic HF protection
|
| Transducers |
150 mm (1 x 6") constant directivity Dual Concentric™
|
AMPLIFIER
| Maximum output power* |
1600 W
|
| Type |
Class-D
|
| Protection |
Output current limiter, clip limiter, brownout protection and recovery, thermal
|
CONNECTORS
| Input |
1 x XLR, balanced
|
| Input impedance |
10 kΩ unbalanced,20 kΩ balanced
|
| Maximum input level for clip |
+4.5 dBu (hard clip at+14.5 dBu input signal)
|
| Link |
1 x XLR
|
| Mains Supply |
Neutrik powerCON 20A†
|
| Controls |
|
| Level |
Recessed potentiometer
|
| Filter |
Hi-pass (HPF)/ full range (FR), switchable
|
| Power mode |
Manual (MAN)/ auto (AUTO), switchable
|
POWER SUPPLY
| Type |
Switch-mode autorange power supply
|
| Mains voltage |
100-240 V~, 50/60 Hz
|
| Power consumption |
60 W @ 1⁄8 max power
|
ENCLOSURE
| Dimensions (HWD) |
334 x 226 x 216 mm (13.1 x 8.9 x 8.5")
|
| Net weight |
7.2 kg (15.9 lbs)
|
| Construction |
12 mm (½ ") plywood, vented and internally braced
|
| Finish |
Semi matt black paint (white optional)
|
| Grille |
Powder coated perforated steel
|
| Flying hardware |
2 x M6 yoke bracket inserts Blanking plate for optional VTH pole mount
|
