A speaker and headphone calibration software delivering consistently accurate studio reference sound.

In less than 20 minutes you can calibrate your existing studio speakers with a measurement microphone (included) and calibrate your existing headphones with more than 280 headphone calibration profiles already included in the software as ready-to-use presets. With an applied calibration profile the software sets the frequency response target to be completely flat across all audible frequencies so you can trust that every mix will translate. You can also now make custom adjustments to the target curve in real-time with the new custom target feature.

With accurate studio reference sound, you can seamlessly switch between speakers, headphones, and rooms. Finally, mix with confidence and make music that sounds great everywhere.

Features

• Reliable, consistent, easy-to-use calibration software for all of your audio system
• Ready-to-use headphone calibration for 480+ models
• Accurate speaker measurements and calibration for stereo systems
• Custom target: target curve adjustments in real-time
• 3 filter modes: Zero Latency, Mixed and Linear Phase
• Additional DSP processing controls: Mono, Dry/Wet, and Safe Headroom
• MIDI mapping in the SoundID Reference app for various controls
• User Presets in the SoundID Reference app for switching quickly between predefined output device/channel pair combinations

What's Included

• SoundID Reference app for Speakers & Headphones
• SoundID Reference DAW plugin (AU, VST, AAX)
• SoundID Reference Measurement Microphone with an XLR connection and individual calibration profiles
• Microphone clip for a ⌀21～26mm microphone, with a 5/8" screw-on thread
• Averaged profiles for 480+ supported headphone models
• Activation key for the product license: the product can be activated and used on 3 machines

System Requirements

• Mac: macOS 10.14; 10.15; 11 Big Sur; 12 Monterey, 13 Ventura
• PC: Windows 10; 11
• Stable internet connection (offline use not supported)
• Sonarworks supported or Sonarworks individually calibrated headphones
• 2.0 stereo speaker system
• XLR to XLR audio cable

Audio interface requirements during the speaker measurement process:

• An audio interface featuring +48v Phantom Power and 44.1 kHz sample rate capability
• The same audio interface must be used for input/output
• The audio hardware setup must consist of a single external hardware device only (additional preamp units are supported)

Microphone Specifications

• Houses pre-polarized electret-condenser capsule
• Frequency response: 20 Hz - 20kHz with supplied calibration profile
• Omnidirectional polar pattern
• Sensitivity is rated at -37dB/Pa (14 mV)
• Self noise: 24 dB
• S/N ratio: 70 dB
• Dynamic range: 106dB
• Maximum SPL: 132 dB SPL