Rolls MX401 Four-Channel Stereo Mixer

Brand Image
UPC675889004014
SKUMX401
CA$419.00
Online financing options available at checkout
Receive 2095 points!Get a 10% discount by reaching 25,000 points
1

Available Online

Usually 1-2 weeks before shipment

Not In-Store

In case of additional delays, you will be contacted by one of our sales representative.

Any questions? We are here to help.

Description

Compact, rugged, and efficient, the MX401 Four-Channel Stereo Mixer from Rolls is a deceptively flexible analog audio mixer designed to make mobile sound setups and field recording hassle-free. The unit features four channels of XLR audio input and balanced stereo XLR outputs, with all XLR I/O featuring individual mic/line level selection. The MX401 also sports level control for each input channel, master gain control, an extra 3.5mm stereo output for headphones or as an aux send, and 15V of phantom power selectable for each input. Crucially, the MX401 can not only run off of the included 15 VDC power supply, but also on two common 9V alkaline batteries for completely mobile, outlet-free operation.

Elegant and Efficient I/O
  • Four balanced XLR input channels with mic/line selection 
  • Level control and stereo pan control per channel
  • Balanced stereo XLR outputs provide a stereo feed for monitors, PA system, or audio interface 
  • Selectable mic/line level for each XLR output
  • Flexible unbalanced 3.5mm stereo output for headphones or record send
  • Main output gain control with clip indicator 
Flexible Power Options
The MX401 features two options for power, including a standard 15 VDC power supply (included) and the ability to run on two 9V alkaline batteries, placed in dedicated slots on the side. This ensures the MX401 can perform well in either a fixed position setup or a mobile setup, such as a field recording system. The unit also comes with selectable 15V phantom power, allowing individual selection of powered inputs.

Rolls MX401 Specs

Mixer
Number of Analog Input Channels 4 (4 Mono)
Number of Mic Preamps 4
Analog Output Channels 1 x Stereo Master Output
Max I/O Capacity 4 x Input / 2 x Output
Mix Routing Stereo Main Mix
Faders None
Meters Main Meter:
1 x Single LED
Signal Processing
Gain/Trim Range Up to +55 dB
Dynamic Processing None
Sidechain Filters None
EQ None
Solo/Mute None
Channel Output/Source Monitoring PFL, Post-Preamp
Built-In Effects None
Performance
Frequency Response 20 Hz to 20 kHz -3 dB
Max Input Level -14 dB
Output Level +14 dB
I/O Impedance Input:
600 Ohms (Mic)
10 Kilohms (Line)
Output:
600 Ohms (Mic)
10 Kilohms (Line)
EIN -65 dB at Max Gain
-90 dB (Typical)
SNR 96 dB
THD+N 0.2%
Connectivity
Analog Inputs 4 x XLR 3-Pin Balanced Mic/Line Input
Analog Outputs 2 x XLR 3-Pin Balanced Mono Line/Mic Output (1 Stereo Pair, Post-Fader)
1 x 1/8" / 3.5 mm TRS Unbalanced Stereo Headphone/Record Output (Post-Fader)
Phantom Power +15 V, Selectable On/Off (Selectable on Individual Inputs)
Digital I/O None
Bluetooth None
Power
Power Supply Output 12 to 15 VDC at 500 mA, Center-Negative (Included)
Current Consumption 30 mA
Physical
Rack Mountable No
Dimensions 8.5 x 1.5 x 5.8" / 21.6 x 3.8 x 14.7 cm
Weight 2.1 lb / 1 kg
Estimated shipping calculator

Enter details above

Discover our promotions