Neumann KH 150 AES67 DSP-Powered Bi-Amplified Studio Monitor - 6.5" (White)

Online

✓ This product is available to order online
Estimated Processing time before shipment 1-2 weeks
* In case of additional delays, you will be contacted by one of our sales representative
X In-Store
2069 avenue Chartier, Dorval, QC H9P 1H3

Price:
Sale price$2,695.00 CAD

Online Financing available at checkout

Talk with a customer representative

Picture of a RedOne Music customer representative Picture of a RedOne Music customer representative Picture of a RedOne Music customer representative Picture of a RedOne Music customer representative Picture of a RedOne Music customer representative

Our customer support representatives have a thorough understanding of our products and are available to assist you with any product-related questions you may have.

Help Center
Sold and shipped by Logo Redone
Any questions? Call Us ☎ 514-225-2226 or Chat with us!

RedOne Music is a Canadian authorized Neumann retailer.
Business Hours: Monday - Friday: 9AM to 6PM | Weekends: 10AM to 5PM

Description

The KH 150 AES67 is a powerful bi-amplified studio monitor with reference-class performance. Its 6.5” woofer in a bass reflex cabinet provides stunning low end and high SPL capability with undiminished clarity. DSP controlled electronics ensure linear phase response and allow for room-adaptive calibration via Neumann’s revolutionary MA 1 Automatic Monitor Alignment.

FEATURES

  • High-precision drivers, Mathematically Modelled Dispersion (MMD) waveguide
  • Linear frequency response 39 Hz … 21 kHz (±3 dB)
  • Linear phase response 105 Hz … 16 kHz (± 45°) with latency < 2,6 ms
  • DSP engine allows for room adaptive calibration via Neumann’s MA 1
  • Razor-sharp imaging due to extremely low tolerances (± 0.8 dB)
  • May be combined with other KH line speakers in immersive/surround setups.

WHAT YOU HEAR IS WHAT YOU GET

The KH 150 follows the same philosophy as all Neumann studio monitors: highest linearity, lowest distortion, no coloration, and perfect adaptability to any acoustic environment. It allows you to hear every nuance of your tracks. Mixing becomes so much faster and easier, once the guesswork is over. And more creative, too: Sounds genius, but can I get away with that? Is that vocal bright or sibilant? Is it too much bass? The KH 150 will tell you. Honestly.

ONE BIGGER

What differentiates the KH 150 from its smaller siblings is its deeper bass response down to 39 Hz. That’s almost as low as the larger KH 310, thanks to the KH 150’s novel 6.5” high-precision woofer in a carefully designed bass reflex cabinet. The KH 150 is thus ideally suited to urban music, EDM, film scoring, and all styles that require extended low end and/or elevated listening levels. Thanks to powerful amplifiers (145 W/100 W) and sophisticated protection limiters, no clarity is lost even at high SPLs. But, being a true universalist, the KH 150 works just as well for everything from rock to classical music, broadcast applications and voice-over work.

The KH 150 has an exceptionally linear frequency response from 39 Hz to 21 kHz (±3 dB). Not only that: It also linearizes the phase response! Which translates to clear mids with astonishing transparency as well as extreme accuracy in the time domain: precise impulse reproduction and finely resolved reverbs. This is made possible by DSP controlled electronics which allow for sophisticated crossovers avoiding the phase distortion caused by analog filters. The internal DSP also realizes new standards in tonal consistency. The KH 150 is made to extremely low tolerances of no more than ± 0.8 dB! And you can hear it, too: Stereo imaging is razor-sharp.

READY FOR YOUR ROOM

Even the best loudspeaker only sounds as good as the acoustic environment allows. Neumann’s Mathematically Modelled Dispersion (MMD) waveguide guarantees a wide sweet spot and minimizes desk reflections. But the KH 150 goes much further: Its internal DSP allows for room calibration via Neumann’s revolutionary Automatic Monitor Alignment. MA 1 (sold separately) makes sure your DSP powered monitors are optimally adapted to the character of your room and perfectly calibrated for your listening position. Even in acoustically treated rooms, this results in a huge improvement.

Tonal compatibility with other KH line studio monitors makes it possible to use the KH 150 in mixed setups e.g. in surround/immersive setups. For flexible connectivity the KH 150 features both analog and digital inputs.

AES 67 – AUDIO OVER IP

Additionally, the KH 150 AES67 model variant offers integrated redundant AES67 audio network ports that are fully compliant with broadcast standards such as ST 2110, ST 2022-7 redundancy, and RAVENNA. At the same time, the KH 150 AES67 is compatible with DANTE®-generated AES67 network streams.

ENERGY EFFICIENT

Neumann engineers took great care to develop a patent pending amplifier technology which combines superior audio performance with the energy efficiency of Class D. Although the KH 150’s amplifiers deliver up to 145 W to the 6.5” woofer and 100 W to the 1” tweeter, they only consume 17 W at idle. Auto-standby reduces power consumption to 0.3 W when the KH 150 has not been used for a while, but can be deactivated.

MOUNTING OPTIONS

Most of the KH 120 accessories also fit the KH 150, with the exception of the LH 65 table stand, which is available in a slightly larger version in the form of the new LH 66 (Cat. No. 700258). The LH 61 (L bracket) was updated, because the KH 150 is a bit heavier/larger than the KH 120 and the LH 64 (VESA mount) was adjusted to allow access to the controls of the KH 150. The order numbers here are unchanged..

All mounting options can be found in our updated Monitor Mounting Matrix. At a later date we will also update the Monitor Accessory Finder.

The KH 150 is available in two color options, anthracite and white.

SPECIFICATIONS

  • Free field frequency response ±6 dB -  36 Hz ... 21 kHz
  • Free field frequency response ±3 dB -  39 Hz ... 20.4 kHz
  • Pass band free field frequency response -  42 Hz … 20 kHz, ±1.25 dB
  • Free field frequency linearity deviation between 100 Hz and 10 kHz -  ±0.8 dB
  • Self-generated noise at 10 cm (with input gain set to 100 dB SPL for 0 dBu) -  <20 dB(A) SPL
  • Sine wave output with a THD < 0.5 % at 1 m in half space -  95 dB SPL (>75 Hz)
  • Max. SPL calc. in half space at 3% THD at 1m (averaged between 100 Hz and 6 kHz) -  118.7 dB SPL
  • Max. SPL in full space at 3% THD at 1m (averaged between 100 Hz and 6 kHz) -  112.7 dB SPL
  • Bass capability: Max. SPL in half space at 3% THD at 1m (averaged between 50 Hz and 100 Hz) -  107.5 dB SPL
  • Max. short term SPL with IEC-weighted noise (IEC 60268-5) at 1 m, in typical listening conditions -  108 dB(C) SPL
  • Max. short term SPL with music material at 2.3 m in typical listening conditions (pair / full range) -  100 dB(C) SPL
  • Max. short term SPL with music material at 2.3 m, in typical listening conditions (pair with subwoofer) -  106 dB(C) SPL
  • Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair full range) -  88 / 94 dB(C) SPL
  • Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair with subwoofer) -  88 / 94 dB(C) SPL
  • Dolby D.A.R.D.T. Max SPL fullrange -  114 dB
  • Dolby D.A.R.D.T. Max SPL bass managed -  120 dB
  • Recommended Listening Distance -  1.0 … 2.5 m; (3'… 8')
  • Feasible Listening Distance -  0.75 … 6.0 m; (2'6"… 18')
  • Acoustic principle -  Bassreflex, Ports at the front
  • Analog input(s) -  XLR: analog electronically balanced
  • Analog input impedance -  24 kOhms
  • Max. input level  
    • +24 dBu for 94 dB SPL setting
    • +14 dBu for 100 dB SPL setting
    • +9 dBu for 108 dB SPL setting
    • -1 dBu for 114 dB SPL setting
  • Common mode rejection ratio (CMRR) -  >56 dB @ 15kHz
  • Volume control -  via MA 1 software
  • Volume control range; resolution -  0 … -∞ dB; 0.1 dB
  • Analog dynamic range; THD+N -  118 dB, A-weighted, 90 dB
  • Signal routing modes -  analog, S/PDIF L, S/PDIF R, S/PDIF mono
  • Digital input(s) -  RCA (75 Ω): S/PDIF
  • Digital output(s) -  RCA (75 Ω): S/PDIF
  • Max. Input Level; pk-pk, unbalanced / balanced -  1.2 V
  • Digital converter: resolution; design -  24 Bit
  • Digital converter: sampling rate -  32 kHz..200 kHz
  • Digital internal sampling rate -  48 kHz
  • Output sample rate -  identical to input sample rate
  • Latency ADA / DA -  Analog Input: 2.6 ms; SPDIF Input: 2.1 ms
  • Delay: User adjustable delay range -  0 … 120 ms
  • Delay: Resolution: time; distance -  20.8 µs
  • Delay: Max. frames Audio-video synchronisation (lip sync) -  0 … 120 ms for TOF=0ms, depends on APP implementation
  • Delay: Time-of-flight maximum distance -  0 … 120 ms for lipsync=0ms, depends on APP implmentation
  • Input gain control (sensitivity) -  0 dB ... -15 dB
  • Output level control (output level in 1 m based on 0 dBu input level) -  94; 100; 108; 114 dB SPL
  • Equalization: Bass -  0; -2; -4; -6 dB
  • Equalization: Low-Mid -  0; -2; -4; -6 dB
  • Equalization: Treble -  +1; 0; -1; -2 dB
  • Input selector -  Analog; S/PDIF L; S/PDIF R; Mono
  • Ground Lift -  Yes
  • Control -  Local; Network
  • Mains Switch -  Yes
  • Mains Voltage Select -  Universal Power Supply 100 V~ … 240 V~
  • Controller design -  Digital; active
  • Crossover frequency -  1700 Hz
  • Crossover slope -  48 dB / octave
  • Equalization: via Neumann.Control software -  No
  • Automatic room calibration via MA 1 -  Yes
  • FIR phase correction -  Linear phase (105 Hz ... 16 kHz; +/- 45°)
  • Protection circuitry
    • Independent soft clip
    • Peak and thermo limiters for woofer and tweeter
    • Woofer excursion limiter
    • Thermo limiter for the electronics and amplifiers
  • Infrasonic filter: frequency; slope -  38 Hz; 12 dB / octave
  • Remote control -  MA 1 software via an RJ45 connector carrying standard IP data
  • Display: On; Normal Operation -  Neumann logo “White”
  • Display: Identification -  Neumann logo “Rosé”
  • Display: Limit / Clip / Errors / Protection /Boot Mute / Shut Down Mute -  Neumann logo “Red”
  • Logo Brightness -  via MA 1 software
  • AES67 Audio-over-IP Interface
    • Fully redundant AES67 ST2110 compliant audio network interface
    • 2 Fast Ethernet 100Base-TX (IEEE 802.3) RJ-45 connectors
    • Physical redundant network (ST 2022-7)
  • AES67 Audio-over-IP input word length -  24 bits
  • AES67 Audio-over-IP input sampling rate -  44.1 / 48 / 88.2 / 96 kHz
  • AES67 Audio-over-IP input connection management -  RAVENNA, NMOS IS-04 (Discovery & Registration) and NMOS IS-05 (Connection Management)
  • Output power woofer amplifier (THD+N with limiter deactivated: 10%) -  145 W
  • Output power tweeter amplifier (THD+N with limiter deactivated: 10%) -  100 W
  • Output power woofer amplifier (THD+N with limiter deactivated: 0.1%) -  120 W
  • Output power tweeter amplifier (THD+N with limiter deactivated: 0.1%) -  80 W
  • Mains Power Supply: input voltage; frequency -  100-240 V; 50/60 Hz
  • Power consumption (230 V / 100 V): Standby -  0.3 W
  • Power consumption (230 V / 100 V): Idle -  15 W
  • Power consumption (230 V / 100 V): Full output -  320 W
  • In-rush current (Peak) -  33 A
  • Standby -  automatic, 90 mins (default); user defined in software
  • Cabinet material -  Composite polycarbonate front and rear, wooden sleeve
  • Cabinet surface finish; color (front / back) -  Painted; metallic anthracite (RAL 7021) / White (RAL 9005)
  • Operating conditions -  ° C (+50° F to +104° F); <75% RH, non-condensing
  • Transport/storage conditions -  -25° C to +60° C (-13° F to 140° F); <90% RH; non-condensing
  • Woofer -  165 mm; (6.5") with protecting white metal grille
  • Tweeter -  25 mm; (1") with protecting white metal grille
  • Mounting points -  2 x M6 threaded inserts with 70 mm spacing on back panel; thread depth 15 mm; (5/8”)
  • Product dimensions (height x width x depth) -  345 x 225 x 273 mm; (13.58" x 8.86" x 10.75")
  • Internal net volume -  12.6 l
  • External net volume -  20.4 l
  • Packed dimensions (height x width x depth), mm (inches) -  480 x 303 x 403 mm; (18.9" x 11.9" x 15.9")
  • Product weight -  8.0 kg; (17 lbs 10 oz)
  • Packed weight -  9.4 kg; (20 lbs 12 oz)
  • Packaging weight inc. Cables and manuals -  1.41 kg; (3 lbs)

WHAT'S INCLUDED

  • 1 x KH 150 AES67 Studio Monitor, White
  • 1 x Mains Cables, White 
  • 4 x Self-adhesive feet
  • 1 x Safety Guide
  • 1 x Supplement “Getting Started Quickly”
Warranty (except USA, Australia, Brasil)
The original Neumann product you have purchased is covered by a warranty of 24 months. The limited warranty applies only to products that belong to the time of purchase to the current Neumann sales program. The warranty period begins on the date of purchase of brand new, unused products by the first end user. Please retain your sales receipt (or your warranty certificate) as proof of purchase. Unless you submit proof of purchase, which will be verified by your local Neumann service partner, you will be obliged to pay for any repairs that are carried out. Proof of purchase must state the date of purchase and name of the product.

If, within the warranty period, the product is determined to be defective (at the date of original purchase) due to improper materials or workmanship, Georg Neumann GmbH or their service partners will, without charge for labour or parts, repair or (at the discretion of Georg Neumann GmbH) replace the product or its defective parts.

Georg Neumann GmbH or their service partners may replace defective products or parts with new or refurbished products or parts. All products and parts replaced become the property of Georg Neumann GmbH or their service partners.

The following cases are not covered by the above warranty:

minor faults or deviations in the quality of a product which do not affect the product's value or fitness for its intended purpose
any accessories supplied with the product
rechargeable and disposable batteries (these products have a shorter life, the length of which also depends on the frequency of use)
faults resulting from improper use (e.g. operating errors, mechanical damage, incorrect operating voltage) Proper use for the purposes of this warranty is defined as use of the product under the conditions stated in the instructions for use.
faults due to wear and tear
any modification of Neumann products effected by you or a third party, unless Neumann has given its prior written consent to the nature and extent of the modification
faults due to force majeure
faults of which the purchaser was already aware at the time of purchase
All warranty claims become void if the product is tampered with by unauthorised persons or repair shops. Warranty claims can be enforced in any country throughout the world in which the statutory rights of the country concerned are not in conflict with our warranty regulations. No other warranty claims or claims over and above the rights stated in these terms and conditions will be accepted.

Consumers may be entitled to statutory rights in their own countries which are not restricted by these warranty terms and conditions, as the warranty is governed by the laws of the country in which the Neumann product was purchased by the consumer. The provisions of the UN Convention on the International Sale of Goods do not apply to this service.

If you wish to file a claim under the warranty, please send the product to your local service partner, together with accessories and proof of purchase. The customer bears the risk of shipment. To avoid any damage in transit, please use the original packaging if possible.

An up-to-date list of all service partners of Georg Neumann GmbH worldwide are available on the internet at www.neumann.com.

Warranty for consumers from the USA
MANUFACTURER'S LIMITED PRODUCT WARRANTY STATEMENT (US)

The service policies and warranty statements on this page are relevant for all Neumann products. Sennheiser Electronic Corporation (referred to as SEC or Sennheiser for the duration of this document) warrants to the original purchaser that the product purchased will be free of defects related to manufacturing, parts, materials, and workmanship under normal and accepted use. Conditions under which the manufacturer's limited product warranty statement is no longer valid can be found below. Neumann offers a worldwide warranty on its products though it is strongly encouraged that all warranty returns be sent to the customer's local Neumann Authorized Service Center.

This limited product warranty is SEC's only warranty and the customer's only remedy concerning the product. All other representations, warranties or conditions, expressed or implied, written or oral, including but not limited to any warranties or guarantees of merchantability, fitness for a particular purpose, or non-infringement, are expressly excluded. As a result, except as set forth in the previous and following paragraphs, the product is sold "as-is" and the customer is assuming the entire risk as to the product's suitability to their needs, its quality and its performance.

Neumann Products: 2 Years
Refurbished Products: Carry the standard warranty**
**Remanufactured product warranties are only valid when purchased from an authorized Neumann reseller.



WARRANTY ELIGIBILITY STATEMENT

In order to be considered eligible for repair or replacement under warranty, included with the repair item(s) must be a valid bill of sale (please see below for more information) from an authorized Neumann retailer detailing the following information:

Retailer's Name

Original Date of Purchase
Model or SKU number of the Product Purchased
Failure to supply a bill of sale with all of the required information will result in denial of warranty repair or replacement.
The following types of documents, printed or electronic, are not considered valid receipts and therefore cannot be used to determine eligibility for warranty:

Credit Card Statements
PayPal and/or eBay (or any other auction site) confirmations
Bank Statements
Bills of Lading, Bills of Material or any other type of shipping detail document
WARRANTY DOES NOT COVER

Counterfeit or "Grey Market" product or products purchased from any non-authorized Neumann dealer.

Damage or inoperability caused by inadequate repair work performed by the end user or any non-authorized repair center.

Other manufacturer's equipment or reimbursement for said equipment that has been used in conjunction with a Neumann product.

Inoperability due to lack of reasonable maintenance and care as determined by SEC.
Accessories or consumable items such as, but not limited to:

Batteries
Cable clips
Foam microphone windscreens
Cases
Damage: This warranty does not cover any physical and/or electrical damage resulting from, but not limited to:

Accident
Misuse
Abuse
Malicious destruction
Acts of nature
The temporary or permanent affixing of any items supplied or not supplied by the manufacturer with any adhesive, fastener or the like.
Use of batteries, power supplies or any other sources of power not specifically recommended by the manufacturer.
Inadequate repair work performed by the end user or any non-authorized repair center.
TERMS AND CONDITIONS

PRODUCT ADVANCE REPLACEMENTS

SEC does not provide advance replacement products.

REFUNDS

SEC will only provide refunds to customers that have purchased product directly from SEC within 30 days from the date of purchase. Customers that purchased product from a Neumann distributor/vendor seeking a refund will have to request reimbursement from the original distributor/vendor.

SHIPPING TO SEC

SEC will be responsible for shipping to the customer after repair/replacement ONLY. The customer is responsible for all shipping/handling charges related to returning the product to SEC or one of the SEC authorized repair facilities. Products must be shipped in their original packaging or otherwise suitably protected to avoid damage during shipping. SEC will not be responsible for any damage incurred during shipment. SEC will only be responsible for packages that are verified as having been received into our warehouse via a shipment tracking number provided by the customer's shipping company.

SHIPPING FROM SEC

All packages will ship within the 50 United States via UPS ground, no signature required, at no expense to the customer. International shipping as well as other shipping methods and options are available; however, all related charges will be the sole responsibility of the customer. Please contact SEC Service Administration at (860) 434-9190 extension #2 for details and pricing.

WARRANTY REPAIRS

In the event that a repair action is performed, SEC will be responsible for all costs associated with the repair including parts and labor costs. All service labor is guaranteed for 90 days or until the conclusion of the originally purchased product's original warranty period, whichever period of time is greater.

WARRANTY REPLACEMENTS

SEC may, at its discretion, choose to replace the product completely with a new or remanufactured product. In the event of product obsolescence, a suitable replacement will be chosen based upon the features, the intended use (according to SEC) and the retail price of the original product. In the event of product obsolescence SEC cannot guarantee the same color or aesthetic attributes as the original product. All warranty replacements are guaranteed for 90 days or until the conclusion of the originally purchased product's original warranty period, whichever period of time is greater.

EXPECTED TURNAROUND TIME

The expected turnaround time is subject to parts and product availability and therefore cannot be guaranteed. For information regarding current turnaround times for warranty repairs and replacements please contact Service Administration at (860) 434-9190 extension #2.

DETERMINING AUTHORITY

The SEC Service Department will be the final determining authority for all potential warranty claims for service and/or replacement.

Warranty for Australian Consumers
Neumann's goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

This warranty is in addition to other rights or remedies under law. Nothing in this warranty excludes, limits or modifies any liability of Neumann which is imposed by law, or limits or modifies any remedy available to the consumer which is granted by law. To make a claim under this warranty, contact:

Sennheiser Australia Pty Ltd
The Zenith, Tower A, L14
821 Pacific Highway, Chatswood, NSW 2067
Phone +61 (0) 2 9910 6700
e-mail: ANZ_Customer_Service@sennheiser.com
All expenses of claiming the warranty will be borne by the person making the claim.

1. At checkout, select Affirm as your payment method

2. Enter a few pieces of information and get a real-time decision

3. Enjoy your purchase, and pay over time. Your payments will be automatically charged, so you can sit back and relax

 

Payment options through Affirm Canada Holdings Ltd. (“Affirm”). Your rate will be 0–31.99% APR (where available and subject to provincial regulatory limitations). APR offered is based on creditworthiness and subject to an eligibility check. Not all customers will be eligible for 0% APR. Payment options depend on your purchase amount, may vary by merchant, and may not be available in all provinces/territories. Actual payment option terms will be shown at checkout. A down payment (or a payment due today) may be required. Affirm accepts debit cards and PAD as forms of repayment on payment options. Select payment options may be eligible for repayment in the form of credit cards. Please review the terms and conditions of your credit card when using it as a form of repayment. Sample payment options may be: a $800 purchase could be split into 12 monthly payments of $72.21 at 15% APR, or 4 interest-free payments of $200 every 2 weeks. For more information, please see https://www.affirm.com/en-ca/how-it-works.

FREE SHIPPING DETAILS

*Please note that only Canada Post delivers to PO boxes.

  • Free Shipping offer is valid on selected products only.
  • Orders will be sent by the shipping method of sender's choice unless specified at the time of order.
  • Free Shipping offer is valid only if all the items in the shopping cart are eligible for Free Shipping
    and the order is $200.00 and over (before taxes).
  • Free Shipping is valid only within Canada.
  • Orders shipped to Newfoundland, Northwest Territories, Nunavut, and Yukon are not eligilble for free shipping.
  • Our everyday low shipping charges will be applied to any non-eligible products at the time of checkout.
  • Courier shipments require an adult signature for proof of delivery.
  • RED ONE Music reserves the right to modify shipping fee.
  • Return shipping costs are the responsibility of the buyer.
RED ONE Music reserves the right to refuse any order with Free Shipping which the website accidentally
offered but did not meet the criteria above. The client will be notified with an every day low shipping charge and asked if they would like to proceed with the order or have it cancelled. 

EXPORT POLICY 
  • All delivery charges and taxes will be added when applicable to the prices shown on our Website.
  • Duties and brokerage fees (if any) will be the sole responsibility of the customer, and may be collected by a third party.
  • Please make sure you have entered the correct information for your coordinates and currency to get the correct pricing for your location.
  • International shipping: We are not responsible for any duty/import/taxes/customs/etc charges. 
  • We do not refund unclaimed or undeliverable packages due incorrect/missing information. If a package is returned as undeliverable/unclaimed, it is the customers responsibility to follow up with the postal carrier and absorb all fees related.
Note: If the name on your billing address does not match the name on your credit card it will delay your order. 
Note: In case of damage during transport, a claim must be submitted to customer service within 24-48 hours as of the day of the receipt of the item.

 

ADDITIONAL SHIPPING FEES

Music Red One offers free shipping on orders that exceed $200; however, reserves the right to charge additional shipping fees for the following delivery services:

  • Shipment that requires a tailgate delivery but was not mentioned prior to the delivery.
  • Shipment resulting in inside delivery.
  • Deliveries with a limited access, and/or additional handling depending on the weight and size of the shipment.
  • Address error or absence of consignee requiring a second or more attempt to complete a delivery.

 

RETURNS

  • All returned opened items are subject to a min 15% to maximum 25% restocking fee.
  • All returned items can take up to 10-14 days to be processed.
  • If you are not completely satisfied with your purchase, returns will be accepted for store credit (less restocking fee & shipping) within 30 days of invoice date.
  • RED ONE Music will accept returns for defective goods that you have ordered from us within 30 days of invoice date for exchange only.
  • All Returns must contain all associated packaging and materials (ie accessories, manuals, wires, etc). Merchandise that is not returned in brand-new condition, including damages, abuse, marks, showing wear, or with missing packaging or accessories, will be subject to additional charges. Shipping and Handling charges (delivery and return) are non-refundable, including any shipping fees not directly incurred that are part of a free shipping promotion. Any items packaged with software, including but not limited to, DJ Controllers, Audio Interfaces, etc., must be returned with the original software disc including serial number and proof of deactivation.
  • Returns or exchanges will not be accepted for the following types of products: Customized, special order, used products, clearance products, expendable items, cartridges, replacement lamps/bulbs, opened computer hardware, rigging supplies, tape, needles, cleaner kits, effect fluid or juice, software, gels, music, displays/televisions/monitors or parts (replacement, repair or item components) - these products are final sale.
  • Returns or exchanges for the following items will only be accepted if they are in factory sealed packaging due to hygienic reasons: headphones & microphones.
  • All returns made MUST be authorized in advance by a customer service representative - and paper work dispatched to you via email. Your RMA form must be included in the box and your RMA number located on the waybill / packaging. Any returned items that arrive without prior approval or missing documentation may be rejected by our shippers. Once received, returns will be processed within 5 business days.
  • If your parcel was damaged in transport, please visit our Help Center and submit a ticket with your order number and include a picture of the exterior of the box, the interior of the box, and of the damaged product. No claims will be accepted without these pictures.
  • If you happen to receive a parcel that got damaged during transport, we must obtain the the following pictures in order to swiftly process a replacement:
    - outside of the shipping box along with a photo of the shipping label
    - inside packaging of the shipping box
    - the damaged unit itself
  • Refunds by e-transfer will be issued to the email address that is associated with your customer profile. The password will be sent to you in a separate email once the refund has been issued. Please note that a $5 service fee will be deducted from your total refund amount if:
    • e-transfer is not accepted in 15 calendar days
    • a change of email address is requested once the e-transfer has already been sent
    • a typo or error has been made in the email address that is associated to your customer profile



      RETURNS EXCEPTIONS
      This return policy covers the majority of our products, with the following exceptions:
      • Products accompanied by software
      • Harmonicas
      • Earplugs and in-ear monitors
      • Reeds
      • Cartridges and styluses



        WARRANTY
        • RED ONE Music is an authorized retailer for each of the brands available on our website. As such, your purchase is authorized for the manufacturer's warranty in Canada.

        In store pick-ups

        • To be eligible for a store pick-up, please review the criteria below:
        • If your order is paid by credit card, you then qualify for a store pick-up. Note that once you pick-up your order, you must present a valid government photo ID as well as the original credit card used during the purchase. The name and address must match the name and billing/shipping address associated to the order.
        • If your order is paid by e-transfer, you then qualify for a store pick-up. You must present a valid government photo ID to match the name appearing on the e-transfer information.
        • If your order is paid by Paybright, you then qualify for a store pick-up. You must present a valid government photo ID to match the name appearing on the Paybright application.
        • Please note that all orders paid using PayPal will not qualify for store pick-up. If you paid by credit card using the PayPal platform, this payment method will also not qualify for store pick-up. 

        In-Store Pickup

        All orders that are picked-up in store must sign the release form acknowledging the reception of your
        order. Note that Music Red One may request to take a copy of your government photo ID to add to this
        acknowledgement form.




        Payment & Security

        American Express Apple Pay Diners Club Discover Google Pay Mastercard Shop Pay Visa

        Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

        Estimate shipping

        You may also like

        Recently viewed