logo

Galaxy Audio AXS-10RM 12-Input Analog Audio Mixer - Rack Mountable

Brand Image
UPC691281003806
SKUAXS-10RM
CA$449.00
Online financing options available at checkout
Receive 2245 points! Get a 10% discount by reaching 25,000 points
1

Available Online

Usually 1-2 weeks before shipment

Not In-Store

Visit Us

In case of additional delays, you will be contacted by one of our sales representative.

Any questions? We are here to help.

1-(888)-733-6631Visit Help Center
Related Products
Gator G-MIXERBAG-2118 Padded Nylon Mixer/Equipment Bag - 21" X 18" X 7"
Gator G-MIXERBAG-2118 Padded Nylon Mixer/Equipment Bag - 21" X 18" X 7"
149.0 CAD
Nanuk 945 Carry Utility Hard Case with Cubed Foam (Black)
Nanuk 945 Carry Utility Hard Case with Cubed Foam (Black)
384.95 CAD
Odyssey FZMX1912 - Universal 12U Rack Mountable Mixer Flight Case
Odyssey FZMX1912 - Universal 12U Rack Mountable Mixer Flight Case
519.0 CAD
Digiflex NSS-20 1/4" Male TRS to 1/4" Male TRS Cable - 20 Foot
Digiflex NSS-20 1/4" Male TRS to 1/4" Male TRS Cable - 20 Foot
50.49 CAD
Digiflex NXX-25 Tourflex NXX-25 XLR Cable - 25 Foot
Digiflex NXX-25 Tourflex NXX-25 XLR Cable - 25 Foot
46.49 CAD
Description
Key Features
  • 12-Input Professional-Quality Mixer
  • Four Microphone Preamps
  • Four Compressors
  • 24-Bit Multi-Effects Processor
  • Three-Band EQ on Mono Channels
  • Four-Band EQ on Stereo Channels
  • Four Channel Inserts
  • Built-In Switch-Mode Power Supply
  • USB Audio Interface

The AXS-10RM from Galaxy Audio is a rack mountable 12-input analog audio mixer featuring premium-quality mic preamps, stereo line inputs, compressors, EQs, a 24-bit multi-effects processor, and an integrated USB audio interface.

Inputs 1-4 on the AXS-10RM provide a 1/4" line input or XLR microphone preamp with phantom power (+48V), a compressor, a 3-band EQ with a sweepable mid, a gain-trim knob, and a high-pass filter. Inputs 5-12 offer mono/stereo 1/4" line inputs, a +4/-10 dB level selection button, and a 4-band fixed frequency EQ. All channels feature 60mm logarithmic faders, pan, mute, two aux sends with stereo returns, switchable solo/pre-fader listen (PFL) buttons, and routing options for main and sub outputs.

The multi-effects processor features 24-bit AD/DA converters and offers 16 presets producing professional-quality reverb, delay, and modulation effects. The on-board switch-mode power supply provides an optimum current supply regardless of input voltage and offers higher efficiency when compared to conventional power supplies. The AXS-10RM ships with a standard IEC power cord.

  • 4 XLR mic inputs
  • 4 Stereo inputs
  • 4 Phantom powered (+48V) mic preamps
  • 4 Built-in compressors
  • 3-Band EQ with sweepable mids per channel
  • 16 Effects with tap
  • USB audio interface
  • 4 Channel inserts
  • 2 AUX sends per channel
  • PFL on each channel
  • Balanced main outputs
  • Headphone output
  • Control room controls
  • 60mm logarithmic faders
  • Sealed rotary controls
  • Switching power supply

Galaxy Audio AXS-10RM Specs

Inputs & Outputs
Inputs Inputs 1-4: 4 x Balanced XLR or 4 x 1/4"
Inputs 5-12: 8 x 1/4"
Aux Returns: 4 x 1/4"
2TK/USB: 2 x RCA
DSP Mute Switch: 1/4"
Insert Send/Return: 4 x 1/4"
Outputs Main: 2 x XLR, 2 x 1/4"
Sub: 2 x 1/4"
Control Room: 2 x 1/4"
Aux Send: 2 x 1/4"
Phones: 1 x 1/4"
2TK/USB: 2 x RCA
Microphone Inputs
Microphone Type XLR
Electronically Balanced
Discrete Input Circuit
Mic Input Noise (E.I.N.) Mic E.I.N. (20 Hz to 20 kHz):
@ 0 ohm Source Resistance: -134 dB / 135.7 A-weighted
@ 50 ohms Source Resistance: -131 dB / 133.3 dB A-weighted
@ 150 ohms Source Resistance: -129 dB / 130.5 dB A-weighted
Frequency Response: <10 Hz to 150 kHz (-1 dB), <10 Hz to 200 kHz (-3 dB)
Gain Range: +10 to +60 dB
Maximum Input Level: +12 dBu @ +10 dB gain
Impedance: Approximately 2.6 kOhms balanced
Signal to Noise Ratio: 110 dB / 112 dB A-weighted (0 dBu in @ +22 dB gain)
Distortion (THD+N): 0.005% / 0.004% A-weighted
Line Input Type: 1/4" TRS connector electronically balanced
Impedance: Approximately 20 kOhms balanced, 10 kOhms unbalanced
Gain Range: -10 to +40 dB
Maximum Input Level: 30 dBu
Fade-out Attenuation
Crosstalk / Attenuation Main Fader Closed: 90 dB
Channel Muted: 89 dB
Channel Fader Closed: 89 dB
Frequency Response
Microphone Input Microphone Input to Main Out:
<10 Hz to 90 kHz +0 dB / -1 dB
<10 Hz to 160 kHz +0 dB / -3 dB
Stereo Input Type: 1/4" TRS Connector, electronically balanced
Impedance: Approximately 20 kOhms
Maximum Input Level: +22 dBu
EQ Type Mono Channels Low: ±15 dB shelving at 80 Hz
Mid: ±15 dB peak, sweepable from 100 Hz to 8 kHz
High: ±15 dB shelving at 12 kHz
EQ Type Stereo Channels Low: ±15 dB shelving at 80 Hz
Low-Mid: ±15 dB peak at 500 Hz
High-Mid: ±15 dB peak at 3 kHz
High: ±15 dB shelving at 12 kHz
AUX Sends Type: 1/4" TS connector, unbalanced
Impedance: Approximately 120 Ohms
Maximum Input Level: +22 dBu
AUX Returns Type: 1/4" TRS connector, electronically balanced
Impedance: Approximately 20 kOhms balanced / 10 kOhms unbalanced
Maximum Input Level: +22 dBu
Main Output Type: 1/4" TS unbalanced
Impedance: Approximately 240 Ohm symmetrical / 120 Ohms unbalanced
Maximum Output Level: +22 dBu
Control Room Outputs Type: 1/4" TS connector unbalanced
Impedance: Approximately 120 Ohms
Maximum Output Level: +22 dBu
Headphone Output Type: 1/4" TRS connector, unbalanced
Maximum Output Level: +19 dBu / 150 Ohms (+25 dBm)
Meter 3-color LED
DSP
Converter 24-bit Sigma-Delta
64/128 times oversampling
Sampling Rate 40 kHz
USB
USB Audio: Stereo in/out
Connector: Type B
Converter: 16-bit
Sample Rate: 48 kHz
Main Mix
Noise Main Mix @ -∞ / Channel Fader @ -∞: -101 dB

Main Mix @ 0 dB / Channel Fader @ -∞: -96 dB

Main Mix @ 0 dB / Channel Fader @ 0 dB: -83 dB
Power / Consumption Power Supply: 110-240 VAC, 50/60kHz
Power Consumption: 50 W
Fuse Fuse: T 1.6 A, 250 V
Dimensions 4.6 x 19.0 x 16.5" (11.6 x 48.3 x 41.8 cm)
Weight 11.7 lb / 5.3 kg
Packaging Info
Package Weight 14 lb
Warranty
Estimated shipping calculator

Enter details above

New product releases

View All