The IX30:4 is a 4-channel networked DSP amplifier with 6 kW total output power. Capable of driving Hi-Z or Lo-Z loads with powerTANK technology, the IX30:4 is ideal for a wide range of applications including sports venues, houses of worship, live performance spaces and hospitality.

IX30:4 features eight (8) Dante inputs, eight (8) Dante outputs and four (4) mic/line inputs that can be used as Dante break-in points. The natively operating 96 kHz DSP features a fully equipped 12 x 12 matrix mixer, EQs, dynamics, Dynacord FX and FIR-Drive capability. All 12 inputs feature pilot-tone detection, while the eight (8) Dante and four (4) amplifier outputs allow to add pilot tones up to 30 kHz.

The IX30:4 uses Dynacord‘s patented ecoRAIL technology for optimizing energy consumption. ghostPOWER via POE maintains the entire DSP, the Dante network and all mic/line inputs active, independent of the mains power. The integrated MXEstyle TaskEngine allows for system automation, scheduling, control, and integration to third party devices.

IX series is fully integrated in Dynacord‘s SONICUE Sound System Software and can be used as a SONICUE control server, for direct use with the WPN1 wall panel as well as TPC-1, iOS and Windows devices.

Features

• 4-channel networked DSP amplifier with 3 kW powerTANK for Hi-Z and Lo-Z operation
• 8 x 8 Dante with OCA/AES70 remote control, 4 mic/line inputs usable as Dante break-in
• 96 kHz fully featured DSP matrix mixer and MXE-style TaskEngine for system logic, automation, scheduling and integration
• ghostPOWER via PoE to maintain DSP, Dante network and mic/line inputs
• High efficiency ecoRAIL technology for lower operating costs

Specifications

OUTPUT POWER
Total rated output power 1	3,000
Number of amplifier channels	4
Load	2 Ω	2.7 Ω	4 Ω	8 Ω
All channels driven equally	750 W	750 W	600 W	750 W
Maximum per channel	1.000 W	800 W	600 W	1.000 W
Bridge	1.000 W	1.300 W	1.500 W	1.200W
Direct Drive	70 V		100 V
All channels driven equally	375 W		375 W
Maximum per channel	750 W		1.000 W
Max. output voltage Hi-Z/8Ω mode, per channel	145 Vpk
Max. output current Lo-Z/4Ω mode, per channel	33 Apk

AMPLIFIER
Voltage Gain
Lo-Z mode, ref. 1 kHz	32 dB, adjustable 20.0 - 44.0 dB
Input sensitivity, direct drive mode	+6 dBu ( 1.55 V), fixed
THD+N (3 dB below max. AES17, 1 kHz)	<0,1 %
Crosstalk (ref. 1 kHz, 12 dB below max. 8Ω)	< -80 dB
Frequency resposne (ref. 1 kHz, analog in-speaker out)	20 Hz to 20 kHz (±1 dB)
Sampling rate	96 kHz internal, Dante 48/96 kHz switchable
Latency (analog in-speaker out)	0.77 ms
Number of mic/line inputs	4
Gain	0 to 60 dB
Maximum input level	+18 dBu
Phantom power	+ 48 V, switchable per input
Input impedance	>10 kΩ
E.I.N (A-weighted) @ 150Ω	-127 dBu
Crosstalk (ref. 1 kHz, 12 dB below max. 8Ω)	<-80 dB
CONNECTIVITY
Mic/Line inputs	2 x 5-pin Euroblock-style, male
Speaker outputs	1 x 8-pin Euroblock-style, 2.5 mm² (12 AWG)
Network	2 x RJ45
Control port	1 x 8-pin Euroblock-style
Mains power input	1 x IEC C14
NETWORK
General	1000base-T/100base-TX, integrated switch
Redundancy modes	Glitchfree (PRIMARY/SECONDARY), RSTP
Backup power supply (ghostPOWER)	1 x PoE (IEEE802.3af) on PRIMARY port
Network audio (inputs x outputs)	8 x 8, 48/96 kHz, Dante
CONTROL PORT
GPIO control port	3 ports, switchable: analog in/digital in/digital out
Analog input range	0 V to +13 V, 133 kΩ input resistance
Digital input limits	ON: <1,5 V
	OFF: >2,0 V, internal pull-up (10kΩ / 10V)
Digital outputs	ON: output switched to GND, max. 200 mA
	OFF: open collector
Reference voltage output	+10V, max. 200 mA, supervised, short circuit protected
READY/FAULT	Galvanic isolated relay, max. 30 VDC/500 mADC
GENERAL
Power consumption
Rated power consumption (1/8 max. output power)	550 W
Eco mode	25 W
Stand-by mode	<15 W
Power requirements	100 V to 240 V, 50 Hz to 60 Hz AC
Power Supply Technology	Switching mode power supply with digitally controlled power factor correction
Protections	Audio Limiters, High Temperature, DC, HF, Short Circuit, Back-EMF, Peak Current Limiters, Inrush Current Lim colspan="4"iters, Mains Over-/Under Voltage Protection
Cooling	Front-to-rear, temperature controlled fan, supervised
Ambient Temperature Limits	+5 °C to +40 °C (+40 °F to +105 °F)
Dimensions	483 mm x 44,1 mm x 447 mm 19 in x 1.74 in x 17.6 in
Weight	7,45 kg (16.4 lbs)
Shipping weight	9,3 kg (20.5 lbs)