DPA Microphones MMP-ER Modular Active Rear Cable

Brand Image
UPC5713055001032
SKUMMP-ER
CA$640.00
Online financing options available at checkout

Receive 3200 points when buying this product!

Available Online

Usually 1-2 weeks before shipment

Not In-Store

In case of additional delays, you will be contacted by one of our sales representative.

Any questions? We are here to help.

Description

The MMP-ER Modular Active Rear Cable by DPA Microphones is a microphone preamp. It is used with any modular capsule for capturing audio in applications such as with hanging mics or low-profile table or instrument mics. The MMP-ER features a high quality preamp built with a 12mm housing and a 3-pin XLR connector. The capsule attaches to a cable with a length of 3 meters or optionally up to 30 meters. The preamp features impedance balancing with active drive to reject radio frequency interference. This model is built with a rear mounted cable.

Features

  • The preamp is ultra transparent and features the DPA designed impedance balancing with active drive to reject radio frequency interference
  • Can be combined with any DPA modular capsule

Specifications

Output Connector
XLR-3M, pin 1 shield, pin 2 signal + phase, pin 3 - phase
Low-Cut Frequency
-3 dB: 15 Hz
Noise
With Shorted Input, A-weighted: 0.6 µV
Output Voltage
RMS: 2.2 V
Peak: 3.1 V
Type Of Electronic Circuit
Active
Total Harmonic Distortion (THD)
At 1VRMS, 1kHz: < 0.2 %
Dynamic Range
131 dB
Output Impedance
100 Ω
Cable Drive Capability
324' (100 m)
Minimum Load Impedance
2 kΩ
Common Mode Rejection Ratio
> 40 dB
Power Supply
For Full Specifications: 48 V Phantom power (± 4 V)
Current Consumption
3.5 mA
Output Balance Principle
Impedance balancing
Temperature Range
-40 to 113°F (-40 to 45°C)
Relative Humidity
Up to 90 %
Dimensions
118 x 0.75" (3000 x 19 mm)
Weight
3.2 oz (91 g)
Packaging Info
Package Weight
1 lb
Box Dimensions (LxWxH)
12 x 6 x 4"
Estimated shipping calculator

Enter details above

New Product Releases

Popular Categories