Designed for musicians, DJs, entertainers, houses of worship, discos, and other venues, the Crown XLi 2500 Stereo Power Amplifier feature both RCA and XLR inputs as well as Speakon and binding post outputs. The amplifier includes a user selectable input sensitivity of 0.755V or 1.4V, stereo/parallel-bridge-mono modes, power/fault/signal presence/clip LED indicators, forced air cooling, and protection against shorts, no-load, on/off thumps, and interference from radio frequencies in the environment. Drawing from over six decades of experience in building amplifiers, the unit is capable of delivering 750W per channel at 4 ohms, 500W per channel at 8 ohms, and 1500W at 8 ohms in bridged-mono mode..

Specifications

Input	2x electronically balanced XLR-3F  2x electronically balanced RCA
Output	2x binding post  2x Speakon outputs
THD	<0.5% from 20 to 20,000 Hz
Intermodulation Distortion	≤ 0.35% (60 Hz and 7,000 Hz at 4:1 from full rated output to -30 dB)
Slew Rate	>10 V/us
Voltage Gain	33 dB
Damping Factor	8 Ohm, 10 to 400 Hz: > 200
Signal to Noise Ratio	> 100 dB
Crosstalk	Below rated power: -75 dB  20 to 1,000 Hz:-59 dB
Input Sensitivity	For full rated power at 8 ohms: 0.775 or 1.4 V
Input Impedance	Nominal balanced: 20 kilOhm  Unbalanced: 10 kilOhm
AC Line Power	(+10%) 120V~60 Hz  220V~50/60 Hz  230-240V~50/60 Hz
IEC	15 A
Dimensions	19 x 3.5 x 12.4" (48.3 x 8.9 x 31.5 cm)
Weight	29.7 lb (13.5 kg)