The BG-DA-12GS1X4 is a 1x4 12G-SDI splitter and distribution amplifier. This device can split an SD, HD, 3G, 6G, or 12G-SDI video source up to four SDI outputs simultaneously. For any situation where range, quality, consistency, and reliability are all factors, this unit is the correct choice. Whether you need to connect additional displays for video feed monitoring, distribute a 4K signal over a long distance, or daisy chain and cascade multiple units to build a large scale video distribution solution - the BG-DA-12GS1X4 will help you get the job done.

Features

• Multiple Outputs: Split a single SDI source up to 4 different SDI displays or devices
• Buffered and Re-clocked Outputs: Eliminate jitter and increase transmission distance
• Split and Amplify: Split and extend a 4K signal up to 230ft (12G)
• LED Indicators: Signal lock and video rate at a glance
• Interlocked Power Supply: Ensures power stays connected
• Rugged Design: Durable metal structure built to withstand years of operation
• Locking Connectors – Ensure your video cables do not accidentally come unplugged with locking SDI connectors
• Long Distance – Send a 3G-SDI signal up to 594ft
• Portable – Great for use in the field or when you need multiple displays of the same source in different locations

Specifications

SDI standard	SD/HD/3G/6G/12G-SDI
Multi-Rate Support	Auto detection of SD, HD, 3G, 6G or 12G Signals
SDI Compliance	SMPTE 424M, SMPTE 292M, SMPTE 344M, SMPTE 259M, DVB-ASI, ST- 2081(6G), ST2082(12G)
SDI Data rates	1.485 / 2.97 / 5.94 / 11.88 Gbps
Video bandwidth	11.88Gpbs & 11.88/1.001Gbps
Output impedance	75Ω
Reclocking	Yes
Cable equalization	[12G] up to 70m (230ft) [6G] up to 100m (330ft) [3G] up to 180m (594ft)
Audio support	Yes
RP-198 pathological patterns	Immune
PCB stack-up	4-layer board [impedance control — differential 100Ω; single 75Ω]
Input	1x BNC [SDI]
Output	4x BNC [SDI]
BNC connector	75Ω inter-locked socket
Eye pattern characteristics[12G]	Amplitude: Within 800mV (<10%) Rise/Fall time: Less than 35ps Timing jitter: <1.0 UI (10Hz to 1188MHz) Alignment jitter: <0.3 (100KHz to 1188MHz)
Mechanical
Housing	Metal enclosure
Dimensions [L x W x H]	Model: 3.6" x 1.7" x 1.1" [92 x 42 x 28 mm] Package: 7.8" x 5.4" x 2.9" [198 x 137 x 74 mm]
Weight	Model: 4.2 oz [119g] Package: 0.7 lbs [346g]
Fixedness	Wall-mounting case
Power supply	5V 2A DC
Power consumption	2.5 Watts [max]
Operation temperature	32~104°F / 0~40°C
Storage temperature	-4~140°F / -20~60°C
Relative humidity	20~90% RH [no condensation]