Ashly NX3.04 Programmable Output Power Amplifier

Name: Ashly NX3.04 Programmable Output Power Amplifier
Brand: RedOne Music Canada

UPC694970192072

SKUNX3.04

CA$7,469.00

Online financing options available at checkout

Receive 37345 points when buying this product!

Available Online

Usually 1-2 weeks before shipment

Not In-Store

Visit Us

In case of additional delays, you will be contacted by one of our sales representative.

Any questions? We are here to help.

1-(888)-733-6631 Visit Help Center

Description

Ashly nX3.04 overview

The Ashly NX3.04 Programmable Output Power Amplifier features lightweight, energy efficient Class D switching amplifier technology combined with a switch mode power supply. The NX3.04 amplifier is designed to meet the needs of demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces, and convention centers.

The NX3.04 is a base level amplifier, available in either 2 or 4-channel models. Use rear panel DIP switches to program each channel output for either High-Z (70V or 100V Constant Voltage) or Low-Z (stable down to 2Ω) operation. When in Sleep Mode, the NX3.04 amplifier draws less than 1W.

2 and 4-channel high-output, lightweight amplifier with programmable output on each channel (Hi-Z or Lo-Z, selected via rear panel DIP switches)

Power-saving, Energy Management System (Ashly EMS) automatic <1W Sleep-mode (defeatable) ¹

Front panel power switch and level controls (can be disabled for security)

Front panel LEDs for temperature, current, signal, clip, mute, bridge mode, protect, sleep, and disable (of front panel controls)

Neutrik Combo XLR - 1/4" TRS jack plus Euroblock input connectors

Neutrik speakON twist locking loudspeaker connectors for security, safety, and reliability

Rear panel DIP switches per channel for selection of high pass filter, limiter, input gain, and High-Z or Low-Z speaker output configuration

Remote DC level control on each input channel

Neutrik powerCON detachable AC mains connector

Switch mode power supply automatically detects 120 or 240VAC operation

Extensive protection circuitry, continuously variable cooling fans

Multiple independent internal power supplies provide increased channel separation and reliability

Ashly nX3.04 specs

Output Power	Per Channel, EIAJ Test Standard, 1 kHz, 20 Hz to 20 kHz, 1%THD, Low Z Output, All Channels Driven 2 Ω: 3,000 W 4 Ω: 2,000 W 8 Ω: 1,250 W Low Z output, Bridge Mode, 20 Hz to 20 kHz, 1%THD, All Channels Driven 4 Ω: 6,000 W 70 V, 100 V Output, All Channels Driven 70 V (per channel): 2,450 W 100 V (per channel): 1,250 W
Power Draw	Sleep Mode: < 1 W Standby Mode: 70 W Idle (no signal): 100 W
Current Draw	120 VAC Mains (Divide by 2 for 240 V) Sleep Mode: 0.1 A Standby Mode: 1.30 A Idle (no signal): 1.85 A All Channels Driven (Divide by 2 for 240 VAC) Typical: 29.5 A
Dissipation	Thermal (All Channels Driven) Sleep Mode: 3.4 BTU/hr Standby Mode: 238 BTU/hr Idle (no signal): 340 BTU/hr Typical (1/8 maximum power): 2720 BTU/hr
Voltage Gain	Selectable at 26 dB, 32 dB, 38 dB, or 1.4 V
Damping Factor	>250 (8 Ω load <1 kHz)
High-Pass Filter	Input: 80 Hz 2nd order
Distortion	SMPTE (typical): <0.5% THD-N (typical): <0.5% (8 Ω, 10 dB below rated power,20 Hz to 20 kHz)
Channel Separation	-75 dB (dB from full output, 1 kHz)
Signal to Noise Ratio	20 Hz to 20 kHz (unweighted): >114 dB
Frequency Response	20 Hz to 20 kHz, +/-0.05 dB
Input Connector	Balanced: Euroblock 3.5 mm, 1/4" TRS and XLR Combo jack
Input Impedance	10 kΩ
Maximum Input Level	+21 dBu
Output Connector	Speaker: Neutrik speakON
Connection	Data: Euroblock 3.5 mm - Gnd, 18 V, In, Out
Level Control	Remote DC: Euroblock 3.5 mm - Gnd, CV, V+ per input
Attenuation	Per Channel: Front panel, software, offset link group, and remote. Fully off = Mute
Protection	Amplifier: Inrush current limitation, temperature monitoring, output over-power protection, mains fuses
Cooling	Continuously variable temperature controlled axial fan(s)
Environmental	32 to 113˚F (0 to 45˚C) non condensing
Dimensions (W x H x D)	19.0 x 3.5 x 16.8" (482.6 x 88.9 x 426.7 mm)
Weight	< 28.0 lb (12.7 kg)

Estimated shipping calculator