Ashly NE8250PED 8-Channel 2000W Network-Enabled Power Amplifier with AES3, OPDante Cards, & Protea DSP Software Suite (Low-Z)

Brand Image
UPC694970001312
SKUNE8250PED
CA$7299.00
Online financing options available at checkout
Receive 36495 points! Get a 10% discount by reaching 25,000 points
1

Available Online

Usually 1-2 weeks before shipment

Not In-Store

In case of additional delays, you will be contacted by one of our sales representative.

Any questions? We are here to help.

Description

The 8-Channel 2000W Network-Enabled Power Amplifier from Ashly delivers a minimum power of 150W RMS per channel into 8 ohm loads and 250W RMS per channel into 4 ohm loads with all channels operating. The amplifier features pre-installed AES3 input card with pass-thru, OPDante network audio interface cards, and the Protea DSP Software Suite; and is designed around an energy efficient Class-D platform with a switching power supply. When switched into bridged-mono mode, channels 1+2, 3+4, 5+6, or 7+8 of the amplifier delivers over 500W RMS into an 8 ohm load.

The power amplifier includes Euroblock input connectors, Euroblock output connectors, and balanced analog inputs. Besides remote standby for power up, DC remote level control, and contact closure preset recall, the amplifier also features Ethernet control & monitoring of power functions, level, mute, polarity, temperature, current, and amplifier fault conditions. The front panel indicates power status, standby, protect, power switch On/Off, signal level, bridge, temperature & current levels, and Ethernet communication. The amplifier mounts in a standard 19” rack using two spaces (3.5” high).

The power amplifier has an internal factory-installed Digital Signal Processing (DSP) controlled using the Protea Software Suite (network-enabled). Each amplifier input channel can be configured with pluggable DSP blocks to have its own dynamics control, gain functions, graphic and/or parametric EQ, Hi-pass/Lo-pass filters, time delay, metering, and test signal generator. A mixer section with assignable routing allows any input to drive any or all amplifier outputs.

Outputs have the same DSP functions as inputs, with the addition of a quick and automated crossover setup. Both inputs and outputs duplicate their settings to other channels, or link with one or more other channels to track their settings. Presets can be used to store and retrieve global parameters of an amplifier’s control surface and DSP section from a file. Sub-presets allows for a collection of individual DSP function parameters within and across both channels of an amplifier to be stored and recalled as a set, affecting only those parameters which have been tagged. Up to 35 presets/sub-presets can be stored within the amplifier and recalled in real time via Ethernet from a computer using the Protea Software Suite.

  • 10/100 Ethernet for remote control and monitoring
  • Low-Z (4 Ohms) 
  • Pre-installed AES3 input card with pass-thru, OPDante network audio interface cards, and Protea DSP Software Suite
  • DC voltage remote gain control
  • Switched-mode power supply, Class-D output
  • Stepped & calibrated input attenuators
  • Remote power standby
  • All front panel controls can be disabled via software
  • Temperature-sensitive variable speed fan with front-to-back airflow
  • 4-stage level meters
  • Output current and temperature indicators
  • cTUVus, CE, FCC, and RoHS safety/compliance
Warranty
Estimated shipping calculator

Enter details above

Discover our promotions