The M3FX is a high power loudspeaker system for use in large film and TV post-production studios where the console is up to 8m from the screen.

Combine it with our subwoofers and surround speakers, and it forms an ideal immersive monitoring system for formats including Dolby Atmos HE 7.1.4 and 9.1.4, and full Atmos theatrical multi-channel.

The system is delivered in left-right and centre versions.

The bass section consists of four 300mm MSP (Magnesium Silicate Polymer) low distortion drivers with 100mm ferrofluid-cooled voice coils. The midrange section consists of two 170mm drive units with 75mm voice coils and neodymium magnets. The high-frequency unit is the D260H soft-dome with short waveguide. Inside, there’s a highpower passive crossover linking the mids and tweeter.

These speakers are supplied as two way active. Reccomended amps are our Dynaudio Acoustics DA series with onboard DSP, or our DCA series with built-in filters.

Specifications

• Status: Current
• Segment: Pro
• Series: Dynaudio Acoustics
• Application: Post-production and music
• Type: 3-way hybrid
• Frequency response: 35Hz – 20kHz
• Maximum SPL at 2 metre: 125dB stereo
• Crossover frequencies: 250Hz and 3000Hz
• Total harmonic distortion: 1% at 90dB
• Cabinet dimensions (H x W x D): 1300 x 900 x 515mm
• Weight kg: 110kg
• Finish: Black textured paint
• High frequency driver: 28mm soft-dome in short waveguide
• Midrange: 2x 17cm MSP
• Low frequency driver: 4x 30cm MSP
• Amplifier recommendation: Dynaudio Acoustics DA40/80 DSP, DCA800/1400 (with filters)
• Optional: Hardwood cabinet Oak, cherry, walnut, maple